Bedienungsanleitung Rowenta RH8462 (Seite 15 von 180) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

762912

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

Before you use your vacuum cleaner for the first time, you must charge the battery completely

(for about 12 hours)

While the battery is being charged, the Stop/Start button must be in the Stop position (2.a)

• Place the vacuum cleaner near an electric power point.

• Plug the charger in and connect it to the vacuum cleaner using the socket located at the back of

the neck (fig.5).

• The charge signal (4) located at the front of the main body will light. Leave the vacuum cleaner

to charge. Once the charge cycle is completed (after about 12 hours), the light charge signal will

turn off automatically.

The vacuum cleaner can stay connected to the charger permanently, without any hazard. Keep in

mind, however, that if you decide to keep the charger connected it might become slightly hot. This

would be a completely normal phenomenon.

It is advisable to charge the vacuum cleaner immediately after each use in order to always have it

available with a fully charged battery. Thus, you will gain the maximum benefit from its cleaning

and autonomous performance functions. However, in case you plan to be absent for a long period

of time (on vacation, for example), it is advisable to unplug the charger for, in this case, the

autonomous performance function could be diminished due to automatic power loss.

3 • Turning on the appliance

Unplug the charger cord from the vacuum cleaner. If the charger remains connected to both the

power point and to the appliance, the latter will not function. Hold the vacuum cleaner by the

handle and slide the Stop/Start button downwards, towards one of the two following speeds (fig.6):

• « Min » : Used to vacuum clean thick or delicate rugs and carpets (2.b), as well as fragile surfaces.

Please note : always make sure that the wheels located at the back of the base are clean.

• « Max » : Used for optimum vacuum performance on all floor types, and in case of strong dirt

marks (2.c).

Vacuum cleaner running times* for each usage speed (with a fully charged battery):

USING THE ELECTRO-BRUSH

The electro-brush is a rotating, motorized brush that guarantees maximum cleaning effectiveness

by allowing the appliance to suck up dirt and clean in depth. The bristles, located all along the

brush, remove threads, hair and fur that might be caught on the surface of rugs and carpets.

Please note: If the vacuum head adheres too closely to the surface you are cleaning, change the

speed to « Min ».

ATTENTION: Do not vacuum large fragments of broken objects, as they could block and damage

the brush. Do not use the electro-brush on long hair carpets, on animal fur, or on fringes.

REMOVING AND CLEANING THE ELECTRO-BRUSH

ATTENTION: Always turn off the appliance and unplug it before storing or cleaning.

* May vary according to model

Speed 1

« Min »

Speed 2

« Max »

12 Volts Up to 25 minutes Up to 15 minutes

RO_Aspirateur_AIR_FORCE_UPGRADE_903121-02_Mise en page 1 20/12/12 10:17 Page14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta RH8462 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info