Bedienungsanleitung Rowenta RH8462 (Seite 16 von 180) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

762912

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

Using the tool provided with the appliance (15), press in the two latches located on each side of the

lower side of the Delta head (fig.7). Lift the trap located on top of the electro-brush (fig.8). Remove the

electro-brush and its lateral bearing in order to clean them (fig.9). Carefully remove any threads, hair,

fur, etc. from the electro-brush. Once clean, replace the electro-brush and its lateral bearing (fig.11),

then replace the trap over it (fig.12). Finally, using the tool provided with the appliance, close both

latches (fig.13).

FOR YOUR SAFETY

• Do not touch any rotating parts before you turn off and unplug the vacuum cleaner.

• Do not use the appliance on wet surfaces.

• Do not immerse the appliance in water.

ELECTRO-BRUSH MALFUNCTION

The electro-brush does not function properly or makes an unusual sound

• Either the rotating brush or the axis is blocked: turn off the appliance and clean them.

• The brush is worn out: visit an authorized Service Center in order to have the brush changed.

• The belt is worn out: if the belt makes noise, it means that it is slipping because it’s worn out. Visit

an authorized Service Center in order to have the belt changed.

The electro-brush stops while you are vacuuming

• The thermal security feature has been activated: Turn off the vacuum cleaner by moving the

Stop/Start button to the Stop position (2.a) and unplug it. Check to see if any solid object is blocking

the rotation of the brush. If this is the case, remove the object and clean the electro-brush (fig.10),

then you may keep using the vacuum cleaner.

The electro-brush moves with difficulty

If you find that your vacuum cleaner slides with difficulty along surfaces, progressively reduce the

speed until you reach the « Min » position (2.b). If the problem persists, take your appliance to the

authorized Rowenta Service Center nearest to your home.

See the list of authorized Rowenta Service Centers or contact the Rowenta Consummer Service

department.

4 • Storage

After use, turn off your vacuum cleaner by moving the Stop/Start button to the Stop position (2a). Now

you may store your appliance vertically wherever you like, thanks to the parking position.

To place the vacuum cleaner in the parking position: Place the neck vertically in order to block the

appliance.

To continue using the vacuum cleaner: Take it by the handle and make it swing backwards in order to

unblock it and leave the parking position.

CLEANING AND MAINTENANCE

IMPORTANT: Always turn off the appliance and unplug it before storing or cleaning.

1 • Cleaning the dust tray (9)

1.a Fast emptying

Whenever the dust tray is full, empty it as follows: remove the tray by sliding it downwards (fig.14),

place it over a bin and press the “Push” button in order to open the trap and empty the tray’s contents

(fig.15). Close the trap (fig.16) and replace the dust tray on the main body of your appliance (fig.19).

RO_Aspirateur_AIR_FORCE_UPGRADE_903121-02_Mise en page 1 20/12/12 10:17 Page15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rowenta RH8462 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info