Bedienungsanleitung Ryobi EWS-1366 (Seite 19 von 156) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

491257

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

USING THE LASER GUIDE (FOR EWS-1366

ONLY) (FIG. 14)

WARNING

Do not stare into the laser beam or turn the laser

on when the tool is not in use. Failure to do so

could result in possible serious personal

injury.The laser unit comes from the factory

already installed and aligned.

NOTE: Make a trial cut on a piece of scrap to ensure

laser is aligned. Adjusting the laser may be necessary.

■ Mark the line to be cut on the workpiece.

■ Adjust the depth and angle of the cut as needed.

■ Switch on the laser beam.

NOTE: Do not touch the blade to the workpiece until the

saw has reached maximum speed.

■ Slowly push the saw forward into the workpiece.

NOTE: Keep the laser beam on the marked line on the

workpiece for precision cutting.

■ Once the cut is complete, allow the saw to come to a

complete stop before turning off the laser.

LED WORKLIGHTS (FOR EWS-1366 ONLY)

(FIG. 15)

Your saw is equiped with 2 LED WORKLIGHTS (26).

These worklight help illuminate the work piece in dimly

lit areas and helps when following the cutting line.

ADJUSTING THE LASER GUIDE (FIG. 16)

Adjust the laser angle

■ Rotate the screw clockwise to turn the laser beam to right.

■ Rotate the screw anti-clockwise to turn the laser

beam to left.

Adjust the laser position

■ Rotate the screw anti-clockwise to shift the beam to right.

■ Rotate the screw clockwise to shift the beam to left.

MAINTENANCE

After use, check the tool to make sure that it is in top

condition.

We recommended that you take this tool to an Authorised

Ryobi Service Centre for a thorough cleaning and

lubrication at least once a year.

DO NOT MAKE ANY ADJUSTMENTS WHILE THE

MOTOR IS RUNNING.

ALWAYS DISCONNECT THE POWER CORD FROM

THE SOCKET BEFORE CHANGING REMOVABLE OR

EXPENDABLE PARTS (BLADE, BIT, SANDPAPER,

ETC.), LUBRICATING OR WORKING ON THE SAW.

KEEP HANDLES CLEAN AND FREE FROM OIL AND

GREASE.

WARNING!

For greater safety and reliability, all repairs should

be performed by an Authorised Ryobi Service

Centre.

WARRANTY

All Ryobi products are guaranteed against manufacturing

defects and defective parts for a period of twenty four

(24) months from the date stated on the original invoice

drawn up by the retailer and given to the end user.

Deterioration caused by normal wear and tear,

unauthorised or improper use or maintenance,

or overload are excluded from this guarantee as are

accessories such as battery packs, light bulbs, blades,

fittings, bags, etc.

In the event of malfunction during the warranty period,

please take the NON-DISMANTLED product, along with

the proof of purchase, to your retailer or nearest

Authorised Ryobi Service Centre.

This warranty in no way affects your legal rights

concerning defective products.

LIVE TOOL INDICATOR

This tool features a live tool indicator (22) which

illuminates as soon as the tool is connected to the supply.

This warns the user that the tool is connected and will

operate when the switch is pressed.

ENVIRONMENTAL PROTECTION

Do not dispose of in general household

waste. Instead, dispose of in an

environmentally friendly way. Contact your

local recycling cetre ou council for advise.

Ryobi takes the care of the envrionment very

seriously.

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

EWS-1266EWS-1366(EU).qxd 11/24/2004 4:49 PM Page 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ryobi EWS-1366 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info