Bedienungsanleitung Ryobi RY18LTX38A (Seite 4 von 168) (Alle Sprachen)

798980

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

4Original Instructions

■Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

■Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

■Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

■Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

■Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

■When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

■Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

■Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or

risk of injury.

■Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or temperature

above 130°C may cause explosion.

■Follow all charging instructions and do not charge

the battery pack or tool outside the temperature range

specified in the instructions. Charging improperly or at

temperatures outside the specified range may damage

the battery and increase the risk of fire.

SERVICE

■Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

■Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

GRASS TRIMMER SAFETY WARNINGS

■Do not use the machine in bad weather conditions,

especially when there is a risk of lightning. This

decreases the risk of being struck by lightning.

■Thoroughly inspect the area for wildlife where the

machine is to be used. Wildlife may be injured by the

machine during operation.

■Thoroughly inspect the area where the machine is to

be used and remove all stones, sticks, wires, bones,

and other foreign objects. Thrown objects can cause

personal injury.

■Before using the machine, always visually inspect to

see that the cutter or blade and the cutter or blade

assembly are not damaged. Damaged parts increase

the risk of injury.

■Follow instructions for changing accessories.

Improperly tightened blade securing nuts or bolts may

either damage the blade or result in it becoming detached.

■Wear eye, ear, head and hand protection. Adequate

protective equipment will reduce personal injury by flying

debris or accidental contact with the cutting line or blade.

■While operating the machine, always wear nonslip

and protective footwear. Do not operate the machine

when barefoot or wearing open sandals. This reduces

the chance of injury to the feet from contact with the

moving cutters or lines.

■While operating the machine, always wear long

trousers. Exposed skin increases the likelihood of injury

from thrown objects.

■Keep bystanders away while operating the machine.

Thrown debris can result in serious personal injury.

■Always use two hands when operating the machine.

Holding the machine with both hands will avoid loss of control.

■Hold the machine by the insulated gripping surfaces

only, because the cutting line or blade may contact

hidden wiring. Cutting line or blades contacting a “live”

wire may make exposed metal parts of the machine

“live” and could give the operator an electric shock.

■Always keep proper footing and operate the

machine only when standing on the ground. Slippery

or unstable surfaces may cause a loss of balance or

control of the machine.

■Do not operate the machine on excessively steep

slopes. This reduces the risk of loss of control, slipping

and falling which may result in personal injury.

■When working on slopes, always be sure of your

footing, always work across the face of slopes, never up

or down and exercise extreme caution when changing

direction. This reduces the risk of loss of control, slipping

and falling which may result in personal injury.

■Keep all parts of the body away from the cutter, line or

blade when the machine is operating. Before you start

the machine, make sure the cutter, line or blade is not

contacting anything. A moment of inattention while operating

the machine may result in injury to yourself or others.

■Do not operate the machine above waist height.

This helps prevent unintended cutter or blade contact

and enables better control of the machine in unexpected

situations.

■When cutting brush or saplings that are under tension,

be alert for spring back. When the tension in the wood

fibres is released, the brush or sapling may strike the

operator and/or throw the machine out of control.

■Use extreme caution when cutting brush and

saplings. The slender material may catch the blade and

be whipped toward you or pull you off balance.

■Maintain control of the machine and do not touch

cutters, lines or blades and other hazardous moving

parts while they are still in motion. This reduces the

risk of injury from moving parts.

■Carry the machine with the machine switched off

and away from your body. Proper handling of the

machine will reduce the likelihood of accidental contact

with a moving cutter, line or blade.

Ryobi RY18LTX38A Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info