Bedienungsanleitung Ryobi RY18LTX38A (Seite 5 von 168) (Alle Sprachen)

798980

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

ENGLISH

Original Instructions

■Only use replacement cutters, lines, cutting heads and

blades specified by the manufacturer. Incorrect replacement

parts may increase the risk of breakage and injury.

■When clearing jammed material or servicing the

machine, make sure the switch is off and the battery

pack is removed. Unexpected starting of the machine

while clearing jammed material or servicing may result in

serious personal injury.

ADDITIONAL SAFETY WARNINGS

■Before use and after any impact, check that there are no

damaged parts on the product. A defective switch or any

part that is damaged or worn should be properly repaired

or replaced by an authorised service centre.

■The small blade fitted to the safety guard is designed to

trim the newly extended line to the correct length for safe

and optimum performance. The blade is very sharp. Do not

touch the blade, particularly when cleaning the product.

■Use only the manufacturer’s replacement cutting line.

Do not use any other cutting attachment.

■Make sure that the cutting attachment is properly

installed and securely fastened.

■Never operate the product unless all guards, deflectors,

and handles are properly and securely attached.

■Ensure that the line cut-off blade in the safety guard is

properly positioned and secured before each use.

■Keep the head attachment below waist level.

■Immediately turn off the product and remove the battery

pack in the event of an accident or a breakdown. Do not

operate the product again until it has been fully checked

by an authorised service centre.

■To reduce the risk of injury associated with contacting

moving parts, always turn off the product, remove the

battery pack, and allow both to cool down. Make sure

that all moving parts have come to a complete stop:

●before servicing

●before clearing a blockage

●before checking, cleaning, and working on the product

●before changing accessories

●after striking a foreign object

●whenever leaving the product unattended

●whenever performing maintenance

●whenever the product starts to vibrate abnormally

■Ensure that all guards and handles are properly fitted

and are in good condition.

■Hold the product by designated handles, and restrict

working time and exposure.

■Beware of objects thrown by the cutting means. Clear

debris like small stones, gravel, and other foreign objects

from the work area before starting operation. Wires or

string may become entangled with the cutting means.

■Always ensure that ventilation openings are kept clear

of debris.

■Injuries may be caused, or aggravated, by prolonged use

of the product. When using the product for prolonged

periods, ensure that you take regular breaks.

■Operate the product only in temperatures between 0°C

and 40°C.

■Store the product in a location where the ambient

temperature is between 0°C and 40°C.

ADDITIONAL BATTERY SAFETY WARNINGS

To reduce the risk of ﬁ re, personal injury, and product

damage due to a short circuit, never immerse the product,

battery pack, or charger in ﬂ uid or allow ﬂ uid to ﬂ ow inside

them. Corrosive or conductive ﬂ uids, such as seawater,

certain industrial chemicals, and bleach or bleach-containing

products, etc., can cause a short circuit.

■Charge the battery pack in a location where the ambient

temperature is between 10°C and 38°C.

■Store the battery pack in a location where the ambient

temperature is between 0°C and 20°C.

■Use the battery pack in a location where the ambient

temperature is between 0°C and 40°C.

TRANSPORTATION AND STORAGE

■Turn off the product, remove the battery pack, and allow

both to cool down before storing or transporting.

■Remove all foreign materials from the product.

■Do not store or transport the product with the battery pack

fitted. Remove the battery pack, and secure it separately.

Store the product in a cool, dry, and well-ventilated place

that is inaccessible to children. Keep the product away

from corrosive agents, such as garden chemicals and de-

icing salts. Do not store the product outdoors.

■For transportation in vehicles, secure the product

against movement or falling to prevent injury to persons

or damage to the product.

TRANSPORTING LITHIUM BATTERIES

■Transport the battery pack in accordance with local and

national provisions and regulations.

■Follow all special requirements on packaging and labelling

when transporting batteries by a third party. Ensure that

no batteries can come in contact with other batteries

or conductive materials while in transport by protecting

exposed connectors with insulating, non-conductive caps or

tape. Do not transport batteries that are cracked or leaking.

Check with the forwarding company for further advice.

MAINTENANCE

■Use only original manufacturer’s replacement parts,

accessories, and attachments. Failure to do so can cause

possible injury, can contribute to poor performance, and

may void your warranty.

■Servicing requires extreme care and knowledge and should

be performed only by a qualified service technician. Have

the product serviced by an authorised service centre only.

■Turn off the product and remove the battery back before

conducting any maintenance or cleaning work.

■You may make adjustments or repairs described in this manual.

For other repairs, contact an authorised service centre.

■For the replacement line, use only a nylon filament line of the

diameter described in the specifications table of this manual.

■After each use, clean the product with a soft, dry cloth.

Any part that is damaged should be properly repaired or

replaced by an authorised service centre.

■Check all nuts, bolts, and screws before each use and

at frequent intervals for proper tightness to ensure that

the product is in safe working condition. Any part that is

damaged should be properly repaired or replaced by an

authorised service centre.

Ryobi RY18LTX38A Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info