USING THE STEAM / HOT WATER WAND
Danger of scalding! Dispensing may be preceded
by short spurts of hot water and scalding is pos-
sible. The steam/hot water wand may reach high
temperatures. Do not touch it with bare hands.
DISPENSING HOT WATER
1
Place an empty container under the steam / hot
water wand and open the knob.
2
EXTRA: press the brew button. Hot water will be
dispensed.
PREMIUM: press the manual brew button. Hot wa-
ter will be dispensed.
EXTRA PREMIUM
3
EXTRA: press the brew button again to stop
dispensing and close the steam/hot water
knob.
PREMIUM: press the manual brew button again to
stop dispensing and close the steam/hot water
knob.
PREMIUM: with this procedure you can dispense up
to 6 oz. of water.
DISPENSING STEAM
1
EXTRA: press the steam button and keep it
pressed. The indicator lights turn off . When the
steam light is steadily illuminated, release the
button.
PREMIUM: press the steam button and keep it
pressed. The steam light will start blinking. When
the steam light is steadily illuminated, release
the button.
EXTRA PREMIUM
2
Place an empty container under the steam/hot
water wand. Open the steam knob for a few sec-
onds to purge the wand of any residual water.
When steady steam comes out, close the knob
and remove the container.
3
Fill 1/3 of a container with cold milk. Immerse
the steam wand into the milk and open the
steam knob. Froth the milk by gently swirling
the container.
4
Once the desired result has been achieved, close
the knob and remove the container.
Only for the PREMIUM model, press again the steam
button, only the manual brew button will blink
on the machine.
Before carrying out any other operation, prime
the water circuit (see Section “Priming the Wa-
ter Circuit”).
We suggest using partially skimmed milk, at refrig-
erator temperature, in the desired quantity to ob-
tain a thick froth.
