Bedienungsanleitung Sagem AXIUM_HDD56B (Seite 3 von 16) (Englisch)

33415

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

ENGLISH

After accepting with the OK button, the automatic search begins and the channels

are identified and saved automatically. The most current channels are

automatically put in order according to the country that you chose.

You can also interrupt the search at any time by pressing the MENU button.

4. Description of the buttons and indicator lights

4.1. Buttons located within the righthand side door

AUTO TUNING

Searching

237

Channels found :

Frequency :

MENU key to stop searching

Validation button (in menus).

Programme change button.

P-

V-

P+

V+

STBY

When the menu is called up, the buttons are used for moving within the screens.

and,,

On/off button.

Buttons for adjusting the volume.

2.5. Switching off your SAGEM AXIUM™ Home Cinema Screen

To put your SAGEM AXIUM™ Home Cinema Screen into standby mode, press the standby button on the

remote control or the standby button on the righthand side door.

You can cancel standby mode within 5 seconds (indicator light flashes green) by pressing the standby but-

ton again on the remote control or the righthand side door. After this time, standby mode cannot be stopped.

During the standby phase (approximately 1 minute), the indicator light on the front panel starts flashing orange.

The state of real standby is only effective when this indicator light changes to red.

In order to prolong the lamp's working life, do not interrupt the standby procedure,

NEVER switch off your appliance using the mains switch or disconnect the wall plug

unless the front panel LED is red.

If you want to switch on your television set again, wait at least 10 seconds before pres-

sing the switch on the left.

3. First Rapid Installation

Your SAGEM AXIUM™ Home Cinema Screen is not preset to receive the wireless channels for your region.

This rapid installation is automatically offered when you set up the appliance. It allows you to configure the basic

elements of your product (menu languages, country, and channel reception).

You can return to these settings at any time (see chapter 6).

Select the menu language using the buttons , validate using the OK

key.

Select the country where you are by using the buttons then validate

with the OK button.

and

COUNTRY

PORTUGAL

GREECE

FRANCE

GERMANY

AUSTRIA

ITALY

SPAIN

OSD LANGUAGE

ENGLISH

ELLHNIKA

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

NEDERLANDS

PORTUGUES

Country Colour System Stereo

France SECAM L Nicam L

Germany PAL B, G Two B/G carriers

Austria PAL B, G Two B/G carriers

Italy PAL B, G Two B/G carriers

Spain PAL B, G Nicam B/G

Netherlands PAL B, G Two B/G carriers

Denmark PAL B, G Nicam B/G

Sweden PAL B, G Nicam B/G

Norway PAL B, G Nicam B/G

Finland PAL B, G Nicam B/G

Belgium PAL B, H Nicam B/G

Switzerland PAL B, G Two B/G carriers

UK PAL I Nicam I

Portugal PAL B, G

Greece PAL, SECAM B, G

Poland PAL D, K

Russia SECAM D, K

Czech Republic SECAM D, K

(*) For Australia, choose the Germany configuration.

Internal temperature light:

Red flashing or fixed: Excessive internal temperature.

Put you SAGEM AXIUM™ Home Cinema Screen into

standby and wait for the indicator light to go out.

On/standby light:

Red: standby

Flashing red: switch-on and standby phases

Flashing green: Phase during which the order to go

into standby can be cancelled. (see § 2.5)

Light out: Functioning.

Remote control receiver: the infra-red receiver is located in the bottom/righthand corner of your SAGEM AXIUM™ Home

Cinema Screen. All you have to do is aim at this spot with the remote control.

Lamp indicator:

Red flashing for 10s then going out: The lamp is

worn out; prepare a replacement.

Red flashing for 10s then remaining fixed (the

appliance going into standby): Change the lamp (see

chapter 14)

4.2. Front panel indicator lights and remote control receiver

Infra-red receiver:

Reception of the remote control

Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sagem AXIUM_HDD56B Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sagem AXIUM_HDD56B

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info