typing it in the boxes provided. Otherwise, connect only the PC with the
registered MAC address to the 3G Mobile Wireless Router, then click the ―Clone your
PC’s MAC Address.‖ (Default: Disable)
◆ USB Port — Enables support for a WAN connection using a USB 3G modem and
USB Wireless Card. (Default: Disabled)
◆ Server IP — Sets the PPTP server IP Address. (Default: pptp_server)
◆ User Name — Sets the PPTP user name for the WAN port.
(Default: pptp_user; Range: 1~32 characters)
◆ Password — Sets a PPTP password for the WAN port. (Default:
pptp_password; Range: 1~32 characters)
◆ Verify Password — Prompts you to re-enter your chosen password.
◆ Address Mode — Sets a PPTP network mode. (Default: Dynamic)
◆ IP Address — Sets the static IP address. (Default: 0.0.0.0, available when PPTP
Network Mode is set to static IP.)
◆ Subnet Mask — Sets the static IP subnet mask. (Default: 255.255.255.0,
available when PPTP Network Mode is set to static IP.)
◆ Default Gateway — The IP address of a router that is used when the requested
destination IP address is not on the local subnet.
◆ Operation Mode — Enables and configures the keep alive time.
◆ Primary DNS Server — The IP address of the Primary Domain Name Server. A DNS
maps numerical IP addresses to domain names and can be used to identify network
hosts by familiar names instead of the IP addresses. To specify a DNS server, type the
IP addresses in the text field provided. Otherwise, leave the text field blank.
◆ Secondary DNS Server — The IP address of the Secondary Domain
Name Server.
Option #5 - WAN
SETTINGS – L2TP
Enable Layer 2 Tunneling Protocol (L2TP) by clicking Advanced tag followed WAN.
28
