◆ Ethernet Port — Select ―L2TP‖ for the WAN port connection from the drop-down list.
■ Enable MAC Clone — Some ISPs limit Internet connections to a specified MAC
address. This setting allows you to manually change the MAC address of the 3G
Mobile Wireless Router’s WAN interface to match the PC's MAC address provided to
your ISP for registration. You can enter the registered MAC address manually by
typing it in the boxes provided. Otherwise, connect only the PC with the
registered MAC address to the 3G Mobile Wireless Router, then click the ―Clone your
PC’s MAC Address.‖ (Default: Disable)
◆ USB Port — Enables support for a WAN connection using a USB 3G Modem and
USB Wireless Card. (Default: Disabled)
◆ Server IP — Sets the L2TP server IP Address. (Default: l2tp_server)
◆ User Name — Sets the L2TP user name for the WAN port.
(Default: l2tp_user; Range: 1~32 characters)
◆ Password — Sets a L2TP password for the WAN port. (Default:
l2tp_password; Range: 1~32 characters)
◆ Verify Password — Prompts you to re-enter your chosen password.
◆ Address Mode — Sets a L2TP network mode. (Default: Dynamic)
◆ IP Address — Sets the static IP address. (Default: 0.0.0.0, available when L2TP
Network Mode is set to static IP.)
◆ Subnet Mask — Sets the static IP subnet mask. (Default: 255.255.255.0,
available when L2TP Network Mode is set to static IP.)
◆ Default Gateway — The IP address of a router that is used when the requested
destination IP address is not on the local subnet.
◆ Operation Mode — Enables and configures the keep alive time.
◆ Primary DNS Server — The IP address of the Primary Domain Name Server. A
DNS maps numerical IP addresses to domain names and can
29
