Bedienungsanleitung Samson D-2500 (Seite 6 von 32) (Englisch)

629999

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

1 FADER

– 45mm LED fader for each of the 31 frequency

bands, which can be software set for +/- 12 dB or +/- 6 dB

+/- 3 dB

of cut and boost.

2 ABOVE NULL LED

– Red LED indicating the fader is

below the null

(matching)

point.

Note:

the null point

is the exact location where the fader's

physical

postion

physical postion physical

matches the level of the digital filter.)

3 MASTER FADER

- 45mm LED fader for the Main Output

level, which can be software set for +/- 12 dB

or +/- 3 dB

or +/- 6 dB of cut and boost, as well as

+12/- 120 dB

/- 120

or +3 dB

/- 120

4 LCD DISPLAY

– Backlit display that shows the various

parameters under control by the operating system.

5 DATA WHEEL

– Rotary encoder for entering parameter

values.

6 BELOW NULL LED

- Green LED indicating the fader is

above the null (matching) point.

Note:

the null point is the

exact location where the fader's

physical

postion matches

physical postion matches physical

the level of the digital filter.)

7 BYPASS switch

– When the red LED is on, the digital

equalizer, as well as all the on-board digital processing

effects, are defeated.

8 A / B switch

– Used to switch between the your actual

modified program, to the last program that has been

loaded or stored into memory.

9 LEFT switch

– Assigns the Left (CH1) digital equalizer to

the physical controls.

10 LINK switch

– Used to control the left and right (CH1 and

CH2) equalizer simultaneously with the one set of physi-

cal controls.

Controls and Functions

Front Panel Layout

11 RIGHT switch

- Assigns the Right (CH1) equalizer

to the physical controls.

12 MANUAL switch

– When engaged, the left and

right equalizers are linked to the physical faders.

13 FBM switch

– Used to access the automatic

Feedback control parameters. When selected, the

amber LED will illuminate and the associated val-

ues will be displayed in the LCD window.

14 EQ switch

-- When engaged, the amber LED will

illuminate indicating that the EQ parameters are

under control and displayed in the LCD window.

15 GATE switch

- Used to access the automatic GATE

control parameters. When selected, the amber LED

will illuminate and the associated values for the

digital noise gate will be displayed in the LCD win-

dow.

16 DELAY switch

- When engaged, the amber LED will

illuminate indicating that the DELAY parameters

are under control and displayed in the LCD win-

dow.

17 ENHANCER switch

- When engaged, the amber

LED will illuminate indicating that the DELAY

parameters are under control and displayed in the

LCD window.

18 HP / LP switch

– LED switch used to access the

automatic HI PASS and LOW PASS control param-

eters. When selected, the amber LED will illuminate

and the associated values for the high and low pass

filters will be displayed in the LCD window.

    







               













Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson D-2500 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info