629999
7
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
5
A POWER SWITCH
When set to the ON position the
D2500 is powered up and ready for operation.
B MIDI IN DIN connector
The D2500 receives standard, or
system exclusive, MIDI data here.
C MIDI OUT DIN connector
- The D2500 transmits stan-
dard, or system exclusive, MIDI data here.
D MIDI THRU DIN connector
- The D2500 passes standard,
or system exclusive, MIDI data here.
E I/O Accessory Blank Panel
– removable blanking panel
accesses option bay for adding additional Analog-to
Digital or Digital Input/Output boards.
F
AC input fuseholder
- Connect the supplied heavy
gauge 3-pin “IEC power cable here.
G
D-NET Accessory Blank Panel
– removable blanking
panel accesses option bay for adding the D-NET interface
card for control multiple D class units.
Controls and Functions
Rear Panel Layout
H
CH1 Balanced XLR jack input
- Electronically bal-
anced XLR jack input.
I
CH2 Balanced XLR jack input
- Electronically bal-
anced XLR jack input.
J
CH1 Balanced XLR jack output
- Electronically
balanced XLR jack output.
K
CH2 Balanced XLR jack output
K CH2 Balanced XLR jack outputK
- Electronically
balanced XLR jack output.
19 LIMITER switch
This switch is used to page
through the LIMITER parameters. When selected,
the amber LED will illuminate and the LIMITER
parameters will be displayed in the LCD window.
20 IN / OUT switch
The LED switch is used
to engage the EQ, FEEDBACK, GATE, DELAY,
ENHANCER and LIMITER effects. When one of
the above effects switch is selected, (for example
FEEDBACK), that effect is turned on when the IN /
OUT amber LED is illuminated.
21 GLOBAL switch
When engaged, the red LED will
illuminate indicating access to the unit's GLOBAL
parameters.
22 MIDI switch
- This switch is used to page through
the MIDI parameters. When selected, the red LED
will illuminate and the MIDI parameters will be dis-
played in the LCD window.
23 LOAD switch
– Used to load one of the 100 pro-
grams from the internal memory.
24 STORE switch
- Used to store one of the 100 pro-
grams into the internal memory.
25 Level Meter
- Twelve segment LED meter display
the input level.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES
CLASS B. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MUST NOT CAUSE HARMFUL
INTERFERENCE
, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT
MAY C
AUSE UNDESIRED OPERATION.

7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Samson D-2500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info