Bedienungsanleitung Samson Live L612M (Seite 12 von 76) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

629744

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ENGLISH

Positioning the Live Series

Microphone Positioning - How to Reduce Feedback

Feedback is the annoying howling and squealing that is heard

when the microphone gets too close to the speaker and the volume

is high. You get feedback when the microphone picks up the

amplified signal from the speaker, and then amplifies through the

speaker again, and then picks it up again, and so on and so on. In

general, it is always recommended that any live mic (a mic that’s

on) is positioned behind the speaker enclosures. This will give you

the best level from your system before feedback. One possible

exception is when you are adjusting the sounds of the microphones,

since you want to listen in front of the speaker to hear properly. To

do this, lower your mixers MAIN VOLUME while setting the EQ and

effect from in front of the speakers. Once you have the sound you

like, move the microphones to behind the speakers and raise the

Main volume.

Speaker Placement

Whenever possible, it is a good idea to raise the speakers above

the heads of the listening audience. The L612, and L615 enclosures’

feature standard 1 3/8” pole mount receptacles, which are

compatible with speaker stands from a variety of manufacturers. In

a smaller setting (like a school cafeteria, library, or a mall kiosk), you

can also use the LIVE series in tilt back monitor positions, which will

improve the projection of the speakers and may eliminate the need

for speaker stands. For larger settings (like clubs and parties), the

L1212 and L1215 can be placed directly on the floor which causes a

bass coupling effect that enhances the low frequency response. For

even more bass, place a LIVE series on top of a powered sub woofer

like the Samson dB1500a or dB1800a.

Positioning the L612M Floor Monitor

The L612M is an ideal solution for stage monitoring and

thanks to its unique low-profile design. In a large stage

monitor system, several L612M’s can be daisy-chained

together using the Line Output. When positioning the

monitor, be mindful of the placement of your microphones

to help reduce feedback problems. It’s a really good idea to

know your microphone’s pick up pattern to choose the right

spot. Some microphones, like super and hyper cardioid

models, offer a lot of rejection in the rear of their pick up

pattern and when the L612M is positioned at the same

angle as the rejection, you can set the monitor a lot louder

before it feeds back. In many instances when using several

L612M’s in a monitor system, you may choose to use an

external equalizer like the Samson S Curve 131 to increase

the volume and reduce the chance of feedback. In this case

be sure to set the HIGH and LOW EQ to the 12:00 or flat

position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson Live L612M Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info