Bedienungsanleitung Samson Live L612M (Seite 14 von 76) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

629744

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ENGLISH

Operating the Live Series

Controls and Functions - continued

7. OUTPUT SWITCH

The Output switch is used to

select the signal that is sent to

the Line Output. You can have

either a parallel output direct-

ly from the Line input, or a

mixed signal including the Mic

and line inputs plus the EQ

and limiter. When the switch

is in the up position, the signal

on the Line Output is exactly

the same as the signal on the

Line Input. When the switch

is in the down position, the

Line Output carries the MIX

of the Mic and Line Inputs. If

the Level controls, High and Low Equalizer and Filter are used, they will also affect the signal sent to the

Line Output.

8. POWER SWITCH

Each Live Series enclosure has a main POWER switch to activate the system. It’s a good idea to keep

the POWER switch, and INPUT LEVEL controls, set to their off positions before you install the IEC power

cable. Connect the supplied AC cable to the AC inlet on the rear amplifier panel. Be sure you have

a good AC power connection, and then, set the POWER switch to the “ON” position. The LIVE series

amplifiers feature a “soft start” circuit to protect the amplifier from potentially damaging inrush current.

In order to ensure that the soft start circuit is working properly, be sure to avoid turning the POWER

switch on and off too quickly.

Input and Output Connectors

9. MIC XLR Input (L612 and L615 only)

The Live Series’ microphone input accepts a standard low impedance (150-600 Ohms) input and the

connection is made via a standard female XLR connector. The microphone input features a high qual-

ity, discrete transistor pre-amp providing transparency and extended dynamic range. The MIC input

can work simultaneously with the LINE input so it is possible to use a microphone while playing alone

with a keyboard that is plugged into the Live Series’s LINE input. You can control the microphone input

by using the MIC LEVEL control as described in the section below.

10. LINE OUTPUT

You can run several cabinets by using the LINE OUTPUT to daisy-chain one Live Series to another. The

LINE OUTPUT is a balanced output that, depending on the position of the OUTPUT switch, will have

either a direct parallel output of the Line input, or the Mix of the Line and Mic input. For more informa-

tion on the Output switch, see section 7 above. For more information on cables and wiring, see page 13 of

this manual for a detailed wiring diagrams.

11. LINE Balanced Input

The Live Series speakers employ an XLR connector that accepts a standard XLR mic cable for balanced

line level signals. The LINE input can work simultaneously with the Mic input so it is possible to use a

microphone while playing alone with a keyboard that is plugged into the Live Series’s LINE input. You

can control the LINE input by using the LINE LEVEL control as described in the previous page. For more

information on cable and wiring, see page 13 of this manual for a detailed wiring diagrams.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson Live L612M Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info