Bedienungsanleitung Samson Wireless System Manager for Windows 95 (Seite 11 von 19) (Englisch)

630073

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Quick Start

To Perform An RF Spectrum Analysis

Go to Spectrum Analyze Mode, either by selecting it from the Window menu, or by clicking on the

Spectrum Analyze icon in the Tool Bar. If you are using both UR6D and UR6DX receivers simultaneous-

ly, call up the Group Select dialog either by opening the Setting menu or by clicking on the Group Select

icon in the Tool Bar, then choose the frequency range (standard UR6D frequencies or “X” UR6DX

frequencies) you wish to analyze. You can opt to perform the analysis one time only or to loop it

continuously. To perform the analysis once only, choose “1 Time” from the Analyze menu, or click on the

Analyze Once icon (the left-most icon) in the Spectrum Analyze Tool Bar. To repeat the analysis

continuously, choose “Loop” from the Analyze menu, or click on the Loop Analyze icon (the center icon)

in the Spectrum Analyze Tool Bar. To stop a continuous analysis, choose “Stop” from the Analyze

menu, or click on the Stop Analyze icon (the right-most icon) in the Spectrum Analyze Tool Bar.

For more information, see pages 15 - 16 in this manual or refer to the online Help.

To Create A Channel Plan

Whenever two or more transmitters are used, there is a chance of interference. This is

because spurious emissions can spill over into adjacent channels and produce

intermodulation distortion. In order to reduce this interference, it is good practice to

carefully select the frequencies of each channel (that is, to create a good

channel plan

)

so that the spurious emissions from one channel do not clash with another. One of

WSM’s most powerful features is its ability to create a channel plan.

Here’s how to do so: From Monitor Mode, click on the Channel Plan

icon in the Tool Bar (shown above) or, from the Setup menu, select

the “Channel Plan” option. The Channel Plan dialog (shown at right)

will appear. Begin by specifying the number of channels you want to

have included in the plan. To have WSM generate a channel plan

automatically, click on Auto and then click on the Start (left-hand)

icon. The Status box will keep you apprised of WSM’s progress,

showing first that it is scanning, then planning. The Occupied box

will show which channels are found to be currently in use by

connected receivers. When the Status box shows “Finish,” a

suggested channel plan will appear in the appropriate “B,” “A,” or

“AX” Channel List box on the bottom of the dialog. To have WSM

generate a channel plan manually, click on Manual and then enter in

the Base Frequency (the lowest frequency you wish to have included

in the channel plan). A list of possible channel plans including that

frequency will then appear in the Channel Plan drop-down box. As

you select each one, the frequencies in that plan will appear in the appropriate “B,” “A,” or “AX” Channel

List box on the bottom of the dialog and will be downloaded into all connected receivers when you click

OK. For more information and tips on creating an effective channel plan, refer to WSM’s online Help.

To Get Help

You can always get immediate online assistance (in any of WSM’s screens or Modes of operation) in any

of three ways: Either press the F1 key or open the Help menu (either technique allows you to search

from a database of topics), or click on the Help icon in the Tool Bar, which automatically provides

“pop-up” information about the next function you select.

To Quit WSM

From Monitor Mode, choose “Exit” from the File menu (if you are currently in Play or Record mode, you’ll

have to Stop first). You cannot quit WSM from any other Mode. Be sure to save your data before

quitting, or it will be permanently lost.

Spectrum

Analyze Mode

icon

Group Select

icon

Spectrum Analyze

Tool Bar

Channel

Plan icon

Help icon

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samson Wireless System Manager for Windows 95 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info