Bedienungsanleitung Samsung BD-ES6000 (Seite 25 von 174) (Englisch)

522876

Zoom out

Zoom in

Vorherige Seite

1/174

Nächste Seite

04 Settings

Networks and the Internet

When you connect this player to a network,

you can use network based applications and

functions such as Smart Hub and BD-LIVE,

and upgrade the player's software through the

network connection. For more information about

accessing and using Internet services, see the

Network Services chapter of this manual on pages

43~45. Instructions for configuring the network

connection start below.

Configuring Your Network Connection

Before you begin, contact your ISP to find out

if your IP address is static or dynamic. If it is

dynamic, and you have a wired or wireless

network, we recommend using the Automatic

configuration procedures described below.

If you are connecting to a wired network, connect

the player to your router using a LAN cable before

you start the configuration procedure.

If you are connecting to a wireless network,

disconnect any wired network connection before

you begin.

To begin configuring your network connection,

follow these steps:

1. In the Home screen, select Settings, and

then press the

button.

2. Select Network, and then press the

button.

3. Select Network Settings, and then press the

button.

4. Go to the instructions for Wired networks

starting below or the instructions for Wireless

networks starting on page 26.

Wired Network

Wired - Automatic

After following Steps 1 to 3 above:

1. Select Start in the Network Settings screen,

and then press the

button. The player

detects the wired connection, verifies the

network connection and then connects to the

network.

Wired - Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set the

Network Settings values manually.

After following Steps 1 to 3 above:

1. Select Start in the Network Settings screen,

and then press the

button.

The Network Status screen appears.

The player attempts to verify the network

connection and fails.

2. Select IP Settings on the right of the screen,

and press the

button.

The IP Settings screen appears.

3. Select the IP Mode field, and then set it to

Manual.

4. Use the number keypad on your remote to

enter the Network values. Use the ▲▼◄►

buttons on the remote to move from entry

field to entry field.

| NOTE |

You can get these values from your Internet provider. You

can also view these values on most Windows computers.

For instructions, see "Getting the Network Settings

Values." on page 26.

5. When done, highlight OK, and then press

button. The player verifies the network

connection and then connects to the

network.

IP Settings

Retry

Network Settings

Wired network connection failed.

Unable to connect to the network. Try the following: check if

your IP address is set correctly in IP Settings. Contact your

Internet service provider for more information.

MAC Address XX:XX:XX:XX:XX:XX

IP Address 0.0.0.0

Subnet Mask 0.0.0.0

Gateway 0.0.0.0

DNS Server 0.0.0.0

English 25

02235Z-BD-ES6000-ZN_SJ-ENG.indd 25 2012-02-24 오후 3:32:34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung BD-ES6000 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung BD-ES6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info