Bedienungsanleitung Samsung BD-ES6000 (Seite 27 von 174) (Englisch)

522876

Zoom out

Zoom in

Vorherige Seite

1/174

Nächste Seite

04 Settings

1. Select Start in the Network Settings screen,

and then press the

button. The player

searches for and then displays a list of the

available networks.

2. Select the desired network, and then press

the

button.

3. Select Next, and then press the

button

again.

4. On the Security screen, enter your network's

Security Code or Pass Phrase. Enter

numbers directly using the number buttons

on your remote control. Enter letters by

selecting a letter with the ▲▼◄► buttons,

and then pressing the

button.

5. When done, select Next at the right of the

screen, and then press the

button.

6. The Network Status screen appears.

The player attempts to verify the network

connection and fails.

7. Select IP Settings on the right of the screen,

and press the

button. The IP Settings

screen appears.

8. Select the IP Mode field, and then set it to

Manual.

9. Use the number keypad on your remote to

enter the Network values. Use the ▲▼◄►

buttons on the remote to move from entry

field to entry field.

| NOTE |

You can get these values from your Internet provider. You

can also view these values on most Windows computers.

For instructions, see "Getting the Network Settings

Values." on page 26.

10. When done, highlight OK, and then press

button. The Network Status screen appears.

The product verifies the network connection

and then connects to the network. When it

is done, highlight OK, and then press

button.

WPS(PBC)

One of the easiest ways to set up the wireless

network connection is using the WPS(PBC)

function. If your wireless router has a WPS(PBC)

button, follow these steps:

1. Open the Home screen.

2. Press the BLUE (D) button on the remote

control.

3. Press the WPS(PBC) button on your router

within two minutes. Your player automatically

acquires all the network settings values it

needs and connects to your network.

The Network Status screen appears. The

player connects to the network after the

network connection is verified.

Wi-Fi Direct

The Wi-Fi Direct function allows you to connect

Wi-Fi Direct devices to the player and each other

using a peer-to-peer network, without a wireless

router.

| NOTE |

Some Wi-Fi Direct devices may not support the AllShare

function if connected via Wi-Fi Direct. If this is the case,

it is advisable to change the network connection method

between devices.

1. Turn on the Wi-Fi direct device and activate

its Wi-Fi Direct function.

2. In the Home screen, select Settings, and

then press the

button.

3. Select Network, and then press the

button.

4. Select Wi-Fi Direct, and then press the

button.

The Wi-Fi Direct devices that you can

connect appear.

Display

Audio

Network

System

Support

Refresh

Wi-Fi Direct

Device Name : [BD]ES6000

Select your Wi-Fi Direct device to connect to.

AndroidXXXXXXX Disconnected

Return

English 27

02235Z-BD-ES6000-ZN_SJ-ENG.indd 27 2012-02-24 오후 3:32:34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung BD-ES6000 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung BD-ES6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info