19
Your microwave oven can be programmed to cook food in up to
four stages (The convection mode can not be used in Multistage
cooking).
Example
: You wish to defrost food and cook it without having
to reset the oven after each stage. You can thus
defrost and cook a 1.8 kg chicken in four stages:
◆ Defrosting
◆ Standing for 20 minutes
◆ Microwave cooking for 30 minutes
◆ Grill for 15 minutes
➢ The first two stages must be defrosting and a standing time.
The combination, and grill modes can only be used once
each in the remaining two stages; microwave mode can
however be used twice at two different power levels.
1 Press the Auto Defrost ( ) button and set the weight by turning the dial
knob the appropriate number of times (1.8 kg in the example).
2 Press Hold/Delay( ) button and set the standing time by turning the dial
knob the appropriate number of times (20 minutes in the example).
3 Press the POWER LEVEL( ) button .
4 Set the microwave power level by the pressing POWER LEVEL( )
button to appropriate the Power Level (450W in the example)
5 Set the cooking time by turning the dial knob (30 minutes in the example).
6 Press GRILL( ) button and set the cooking time by turning the dial knob
the appropriate number of times (15 minutes in the example).
7 Press Start ( 1min+) button.
Result: Cooking starts:
◆ When the cooking time is over, the oven will be
beeping and flashing “:0” four times. And the oven will
beep every one minute.
◆ If the door is open, or the Stop ( ) button is pressed,
current time will be displayed.
The Hold Time can be used to set a standing time automatically
(without microwave cooking). You do not need to watch the clock;
the oven will beep when the standing time is over.
1 Press the Hold/Delay ( ) button.
Result: The follwing indication are displayed :
(Hold/Delay mode)
2 Select the standing time by turning dial knob.
3 Press Start ( 1min+) button.
Result: The oven beeps when the standing time is over.
Multistage Cooking
Setting a Standing Time
GB
2CK99(GB) 3/10/00 11:30 AM Page 19
