Bedienungsanleitung Samsung HT-E6750W (Seite 32 von 69) (Englisch)

476571

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

32 English

Settings

Auto Sound Calibration

By setting the Auto Sound Calibration (ASC)

function just once when you relocate or install the

product, you can have the product automatically

recognize the distance between speakers, levels

between channels, and frequency characteristics

to create a 7.1-channel sound field optimized for

your environment.

5V 500mA

ASC IN

ASC

microphone

Auto Sound Calibration Mode

You will hear either the Auto Sound Calibration

mode or the User Speaker Settings.

• Off: You will hear sound in the Speaker Setting

value.

• On: You will hear sound in the Auto Sound

Calibration mode.

Measurement

You will hear either the Auto Sound Calibration

mode or the User Speaker Settings.

1 . Plug the ASC microphone into the ASC IN

jack.

2 . Place the ASC microphone at the listening

position.

• Auto Sound Calibration will be automatically

set up in the following sequence: Front L



Front R



Centre



Surround L



Surround R



Front Top L



Front Top R



Subwoofer

• Press the RETURN

(

)

button to cancel

the Auto Sound Calibration Setting.

Networks and the Internet

When you connect this product to a network,

you can use network based applications and

functions such as Smart Hub and BD-LIVE, and

upgrade the product's software through the

network connection. For more information about

accessing and using Internet services, see the

Network Services chapter of this manual on pages

55~57. Instructions for configuring the network

connection start below.

Configuring Your Network Connection

Before you begin, contact your ISP to find out

if your IP address is static or dynamic. If it is

dynamic, and you have a wired or wireless

network, we recommend using the Automatic

configuration procedures described below.

If you are connecting to a wired network, connect

the product to your router using a LAN cable

before you start the configuration procedure.

If you are connecting to a wireless network,

disconnect any wired network connection before

you begin.

To begin configuring your network connection,

follow these steps:

1 . In the Home screen, select Settings, and

then press the

button.

2 . Select Network, and then press the

button.

3 . Select Network Settings, and then press the

button.

4 . Go to the instructions for Wired networks

starting below or the instructions for Wireless

networks starting on page 33.

Wired Network

❑

Wired – Automatic

After following Steps 1 to 3 above:

1 . Select Start in the Network Settings screen,

and then press the

button. The product

detects the wired connection, verifies the

network connection and then connects to the

network.

HT-E6750W_XU_0222.indd 32HT-E6750W_XU_0222.indd 32 2012-02-22 오후 2:07:292012-02-22 오후 2:07:29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HT-E6750W Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HT-E6750W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info