Bedienungsanleitung Samsung HT-E6750W (Seite 34 von 69) (Englisch)

476571

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

34 English

Settings

❑

Wireless (General) - Automatic

After following Steps 1 to 3 in "Configuring Your

Network Connection" on page 32.

1 . Select Start in the Network Settings screen,

and then press the

button.

The product searches for and then displays a

list of the available networks.

Network Settings

Refresh

WPS(PBC)

Cancel

Select your wireless router from the list.

1/10

ELT

JSY

KT_WLAN_C361

Mirhenge_edu

SO070VOIP

iptime23

2 . Select the desired network, and then press

the

button.

3 . Select Next, and then press the

button

again.

4 . On the Security screen, enter your network's

Security Code or Pass Phrase.

Enter numbers directly using the number

buttons on your remote control. Enter letters

by selecting a letter with an arrow button, and

then pressing

button.

5 . When done, select Next at the right of the

screen. The product verifies the network

connection and then connects to the

network.

NOTE

You should be able to find the Security Code or Pass

Phrase on one of the set up screens you used to set up

your router or modem.

❑

Wireless (General) - Manual

If you have a static IP address or the Automatic

procedure does not work, you'll need to set the

Network Settings values manually.

After folloiwng Steps 1 to 3 in "Configuring Your

Network Connection" on page 32.

1 . Select Start in the Network Settings screen,

and then press the

button. The product

searches for and then displays a list of the

available networks.

2 . Select the desired network or the Add

Network, and then press the

button.

3 . Select Next, and then press the

button

again.

4 . If you select the Add Network, enter your

wireless router's name to connect.

Enter numbers directly using the number

buttons on your remote control. Enter letters

by selecting a letter with the ▲▼◄► buttons,

and then pressing the

button.

Select Next, and then press the

button

again. You can select security type, and then

select Next, and then press the

button

again.

5 . On the Security screen, enter your network's

Security Code or Pass Phrase.

Enter numbers directly using the number

buttons on your remote control. Enter

letters by selecting a letter with the ▲▼◄►

buttons, and then pressing the

button.

6 . When done, select Next at the right of the

screen, and then press the

button.

7 . The Network Status screen appears.

The product attempts to verify the network

connection and fails.

8 . Select IP Settings on the right of the screen,

and press the

button. The IP Settings

screen appears.

9 . Select the IP Mode field, and then set it to

Manual.

10 . Use the number keypad on your remote to

enter the Network values. Use the ▲▼◄►

buttons on the remote to move from entry

field to entry field.

NOTE

You can get these values from your Internet provider. You

can also view these values on most Windows computers.

For instructions, see "Getting the Network Settings

Values." on page 33.

11 . When done, highlight OK, and then press

button. The Network Status screen appears.

The product verifies the network connection

and then connects to the network. When it

is done, highlight OK, and then press

button.

HT-E6750W_XU_0222.indd 34HT-E6750W_XU_0222.indd 34 2012-02-22 오후 2:07:342012-02-22 오후 2:07:34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung HT-E6750W Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung HT-E6750W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info