Bedienungsanleitung Samsung LE52A759 (Seite 27 von 68) (Englisch)

65042

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

English - 25

LAN Connection for Static IP Environment

The procedures to set up the network using a static IP address are described below. You have to manually enter the IP

address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).

1. Connect the [LAN] port on the rear panel of the TV and the LAN port on the wall using the LAN cable.

The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.

If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must

enter these values to complete the network settings. If you do not know the values, ask your network administrator

For the information on how to congure and connect a Sharer (Router), refer to the owner

’s manual for the corresponding

product.

You can connect the TV to the LAN directly without connecting it through a Sharer (Router).

If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP.

For the procedures to use a static IP address, ask your Internet Service Provider.

Network Connection - Wireless

You can connect to the network wirelessly through a wireless IP sharer.

1. Connect the ‘Samsung Wireless LAN Adapter for InfoLive’ into the Wiselink terminal of the TV.

You must use the ‘Samsung Wireless LAN Adapter for InfoLive’(WIS-08BG) to use a wireless network.

The ‘Samsung Wireless LAN Adapter for InfoLive’ is sold separately. Contact a Samsung Electronics agent or service center

for purchasing.

To use a wireless network, your TV must be connected to a wireless IP sharer.

If the wireless IP sharer supports DHCP, you TV can use a DHCP or static IP address to connect to the wireless network.

You must use a wireless IP sharer that supports IEEE 802.11 B or IEEE 802.11G.

If the wireless IP sharer allows you to turn on / off the Ping connection function, turn it on.

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is

currently being used by another device nearby, this will result in interference and communications may fail.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1) Authentication Mode : WEP, WPAPSK, WPA2PSK

2) Encryption Type : WEP, TKIP, AES

If you apply a security system other than the systems listed above, it will not work with the

TV.



TV Rear Panel

LAN Cable

The LAN Port

on the Wall

TV Rear Panel

LAN Cable

IP Sharer

LAN Cable

The LAN Port

on the Wall

You can connect the LAN via a Sharer (Router).

TV Side Panel

LAN

Cable

Wireless IP sharer

The LAN Port on

the Wall

Samsung Wireless LAN

Adapter for InfoLive

BN68-01700A-ENG.indb 25 2008-07-31 �� 6:26:38

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung LE52A759 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info