Bedienungsanleitung Samsung LE52A759 (Seite 29 von 68) (Englisch)

65042

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

English - 27

Cable Network Setup-Manual Setup

To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP). Please check if the LAN cable is

connected. (See page 25)

1. Set “Network Selection” to “Cable”.

2. Select “Cable Network Setup”.

3. Set “Internet Protocol Setup” to “Manual Setup”.

4. Set up “IP Address”, “Subnet Mask”, “Gateway” and “DNS Server”.

5. Select “Network Test” to check the network connectivity.

Wireless Network Setup-Auto Setup

The menu is activated only if the ‘Samsung Wireless LAN Adapter for InfoLive’ is connected. (See page 25)

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically congured. The wireless

IP sharer to be connected to this product must support DHCP.

1. Set “Network Selection” to “Wireless”.

2. Select “Wireless Network Setup”.

3. Set “Internet Protocol Setup” to “Auto Setup”.

4. Select an AP through “Select Access Point”.

5. Select “Network Test” to check the network connectivity.

Wireless Network Setup-Manual Setup

The menu is activated only if the ‘Samsung Wireless LAN Adapter for InfoLive’ is connected. (See page 25)

1. Set “Network Selection” to “Wireless”.

2. Select “Wireless Network Setup”.

3. Set “Internet Protocol Setup” to “Manual Setup”.

4. Select an AP through “Select Access Point”.

5. Select “Network Test” to check the network connectivity.

Source List / Edit Name

Source List

Use to select TV or other external input sources such as DVD players or Cable

Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the

input source of your choice.

TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2 / DVI,

HDMI3, HDMI4, USB, DLNA.

You can choose only those external devices that are connected to the TV.

In the “Source List”, connected inputs will be highlighted and sorted to the

top. Inputs that are not connected will be sorted to the bottom.

Using the Colour buttons on the remote with the Source list

Red (Refresh): Refreshes the connecting external devices.

TOOLS (Option): Displays the “Edit Name” and “Information” menus.

Press the SOURCE button on the remote control to view an external signal

source. TV mode can be selected by pressing the TV button, number

buttons (0~9), and the P < / > button on the remote control.

Edit Name

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / TV / IPTV / Blu-ray / HD

DVD / DMA

Name the device connected to the input jacks to make your input source selection easier.

When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 2 port, you should set the “HDMI2 / DVI”

mode to “PC” in the “Edit Name” of the “Input” mode.

❑



❑



Source List

Edit Name

Input

BN68-01700A-ENG.indb 27 2008-07-31 �� 6:26:38

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung LE52A759 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info