Bedienungsanleitung Samsung ML-551x Series (Seite 37 von 130) (Englisch)

586982

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

Network setup_ 37

1. Press Menu on the control panel.

2. Press the up/down arrow to highlight Information and

press OK.

3. Press the up/down arrow to highlight Con

figuration and press OK.

The machine prints the Config

uration Report.

Using this Conf

iguration Report, you can find your machine MAC address

and IP address.

For example:

• MAC Address: 00:15:99:41:A2:78

• IP Addres

s: 192.0.0.192

Setting IPv4 address

You must set up an IPv4 address for network printing and management. In

most cases a new IP address will be automatically assigned by a DHCP

(Dynamic Host Configuration Protocol) server located on the network.

If you use IPv6 address, refer to "IPv6 Configuration" on page 40

In a few situations the IP address must be set manually. This is called a

static IP and

is often required in corporate Intranets for security reasons.

• DHCP IP assignment: Co

nnect your machine to the network, and wait a

few minutes for the DHCP server to assign an IP address to the

machine. Then, print the Configuration Report as explained above. If

the report shows that the IP address has changed, the assignment was

successful. You will see the new IP address in the report.

• Static IP assignment: Use th

e SetIP program to change the IP address

from your computer. If your machine has a control panel, you can also

change the IP address using the machine's control panel.

In an office environment, we recommend that you contact a network admin-

istrator to set this address for you.

IPv4 setting using control panel

1. Connect your machine to the network with a network cable.

2. Turn on the machine.

3. Press Menu on

the control panel.

4. Press the u

p/down arrow to highlight Network and press OK.

5. Press the u

p/down arrow to highlight TCP/IP (IPv4) and press OK.

6. Press the u

p/down arrow to highlight Set IPv4 Address and press

OK.

7. Press the

p/down arrow to highlight Manual and press OK.

8. Enter the

IP address using numeric keypad and press OK.

9. In the same way, enter other parameters such as Subnet Mask and

Gateway and

press OK.

10. After entering

all parameters, press Stop/Clear to return to the ready

mode.

Now go to "Installing network connected machine’s driver" on page 38.

IPv4 setting using SetIP Program (Windows)

This program is for manually setting the network IP address of your

machine using its MAC address to communicate with the machine. A

MAC address is the hardware serial number of the network interface and

can be found in the Configuration Report.

For using SetIP program, disable the co

mputer firewa

ll before continuing

by performing the following:

1. Op

en Control Panel.

2. Double click Secu

rity Center.

3. Click W

indows Firewall.

4. Disable the firewall.

Installing the program

1. Insert the Printer Software CD-ROM provided with your machine.

When the driver CD runs automatically, close that window.

2. Sta

rt a web browser such as Internet Explorer and open the X drive.

represents your CD-ROM drive.)

3. Doub

le-click Applic

ation > SetIP.

4. Double-click Setu

p.exe to install this program.

5. Click OK. If necessary, se

lect a language from the drop-down list.

6. Follow the instructions in the window

and complete the installation.

Starting the program

1. Connect your machine and the computer using network cable.

2. Turn on the machine.

3. From the Win

dows Start menu, select All Programs > Samsung

Printers > SetIP > SetIP.

4. Click on the

icon (third from left) in the SetIP window to open the

TCP/IP configuration window.

5. Enter the machine’s new information into the configuration window

as follows:

• MAC Address: Find the machine’s MAC address on the Config-

uration Report a

nd enter it without the colons. For example,

00:15:99:29:51:A8 becomes 0015992951A8.

A MAC address is a hardware serial number of the machine’s

network interface and can be found in the Configuration

Report.

• IP Address: Enter

a new IP address for your printer.

For example, if your computer’s IP address is 192.168.1.150,

enter 192.1

68.1.X. (X is number between 1 and 254 other than

the computer’s address.)

• Subnet Mask: Enter a new Sub

net Mask for your machine.

• Default Gateway: Ente

r a new Gateway for your machine.

6. Click Apply, and then click OK. The

machine will automatically print

the Configuration Report. Confirm that all of the settings are cor-

rect.

7. Click Exit to close the SetIP prog

ram.

8. If necessary, re

start the computer’s firewall.

IPv4 setting using SetIP Program (Mac)

For using SetIP program, disable the computer firewall before continuing

by performing the following:

The path and UIs may differ by Mac OS version. Refer to the Mac

OS manual to turn firewall off.

1. Open System Preferences.

2. Click Security.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung ML-551x Series Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung ML-551x Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info