Bedienungsanleitung Samsung ML-551x Series (Seite 38 von 130) (Englisch)

586982

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

Network setup_ 38

3. Click the Firewall menu.

4. Turn the firewall off.

The following instructions may vary for your model.

Perform the following to configure the IP address:

1. Con

nect your machine and the computer using network cable.

2. Insert the Installation CD-ROM, and open the disk window. Open the

MAC_Ins

taller > MAC_Printer > SetIP > SetIPApplet.html.

3. Double click the file and Safari will automatically open, then select

Trust. The browser will open the SetIPApplet.html page that shows

the printer’s name and IP address information.

4. Click on the

icon (third from left) in the SetIP window to open the

TCP/IP configuration window.

5. Enter the printer’s new information into the configuration window as

follows. In a corporate intranet, you may need to have this informa-

tion assigned by a network manager before proceeding.

• MAC Addres

s: Find the machine’s MAC address from the Con-

figuration Report and

enter it without the colons. For example,

00:15:99:29:51:A8 becomes 0015992951A8.

The MAC address is the hardware serial number of the

on-board network interface and can be found on the Con-

figuration Report.

• IP Addres

s: Enter a new IP address for your printer.

For example, if your computer’s IP addre

ss is 192.168.1.150,

enter 192.168.1.X. (X is number between 1 and 254 other than

the computer’s address.)

• Subnet Mask:

Enter a new Subnet Mask for your machine.

• Default Gateway: Ent

er a new Gateway for your machine.

6. Select Apply, then OK, and OK

again. The printer will automatically

print the configuration report. Confirm that all of the settings are cor-

rect. Qu

it Safari. You

may close and eject the installation CD-ROM.

If necessary, restart the computer’s firewall. You have successfully

changed the IP address, subnet mask, and gateway.

IPv4 setting using SetIP Program (Linux)

The SetIP program should be automatically installed during the printer

driver installation.

The path and UIs may differ by Linux OS version. Refer to the

Linux OS manual to turn firewall off.

1. Print the machine’s configuration report to find your machine’s MAC

address.

2. Open the /opt/Samsung/mfp/share/utils/.

3. Double click the SetIP

Applet.html file.

4. Click to open the TCP/IP configuration window.

5. Enter the

MAC address, IP address, subnet mask, default gateway,

and then click Apply.

When you enter the MAC address, enter it without a colon(:).

6. The machine prints the network information. Confirm all of the set-

tings are correct.

7. C

lose the SetIP program.

Network parameter setting

You can also set up the various network settings through the network

administration programs such as SyncThru™ Web Admin Service and

SyncThru™ Web Service.

Restoring factory default settings using SyncThru™

Web Service

1. Start a web browser such as Internet Explorer, Safari or Firefox and

enter your machine’s new IP address in the browser window.

2. Click Go

to access th

e SyncThru™ Web Service.

3. Click Logi

n on the upper right of the SyncThru™ Web Service web-

site.

A log-in page appears.

4. Type

in the ID and Password then click Login.

If it’s your first time logging into SyncTh

ru™ Web Service, type in the

below default ID and password.

• ID: admin

• Password: s

ec00000

5. When the Syn

cThru™ Web Service window opens, click Settings

> Network Settings > Restore Default.

6. Click Clear for

network.

7. Turn off and restart machine to apply settings.

INSTALLING NETWORK CONNECTED

MACHINE’S DRIVER

Windows

This is recommended for most users. All components necessary for

machine operations will be installed.

Follow the steps below:

1. Make sure that the machine is connected to the network and powered

2. Insert the supplied software CD into your CD-ROM drive.

If the installation window does not appear, click Start > All programs >

Accessories > Run.

X:\Setup.exe repl

acing

“X” with the letter, which represents your

CD-ROM drive and click OK.

3. R

eview and accept the installation agreements in the installation win-

w. Then, click Next.

4. Select Newtork connection on the Printer Connection Type screen.

Then, click Next.

5. F

ollow the instructions in the installation window.

You can select the software applications in the Select Software to

Install Window.

Silent installation Mode (Windows only)

Silent installation mode is an installation method that does not require

any user intervention. Once you start the installation, the machine driver

and software are automatically installed on you computer. You can start

the silent installation by typing /s or /S in the command window (See

"Silent installation Mode (Windows only)" on page 32).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Samsung ML-551x Series Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung ML-551x Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info