Bedienungsanleitung Samsung ML-551x Series (Seite 40 von 130) (Englisch)

586982

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

Network setup_ 40

4. Unpack the UNIX printer driver package archive.

For example, on IBM AIX use the following commands.

cd /tmp

gzip –dc /cdrom/unix/packages/aix_power/aix_power.tar.gz | tar

–xv

f –

The “binaries” folder consists of binz, install, share files and folders

5. Cop

y the “binaries” folder to any local folder.

6. Cha

nge to the driver’s “binaries” directory.

cd aix_power/binaries

7. Run

the install script.

./install

install is the

installer script file which is used to install or uninstall the

UNIX Printer Driver package.

Use “ch

mod 755 install” command to give the permission to the

installer script.

8. Execute th

e “. /install –c” command to verify install results.

9. Run

‘installprinter’ from the command line. This will bring up the

Add Printer Wizard window. Setup the printer in this window refer-

ring the procedure next.

On some UNIX OS, for example on Solaris 10 just added

printer may not be enabled and/or may not accept jobs. In this

case run the following two commands on the root terminal:

accept <printer_name>

enable <printer_name>

Uninstalling the printer driver package

The uninstalling printer utility should be used to delete the printer

installed in the system.

a) Run

“uninstallprinter” command from the terminal.

It will open the Uni

nstall Printer Wizard

The installed printers are listed in the drop-down list

b) Sele

ct the printer to be deleted.

c) Cli

ck Delete to delete the printer from the system.

d) Execute th

e “. /install –d” command to uninstall the whole

package.

e) To

verify uninstall results, execute the “. /install –c” command.

To reinstall it again, use the command “. /i

nstall” to reinstall the binaries.

Setting up the printer

To add the printer to your UNIX system, run ‘installprinter’ from the com-

mand line. This will bring up the Add Printer Wizard window. Setup the

printer in this wind

ow according to the following steps:

1. Typ

e the name of the printer.

2. Sele

ct appropriate printer model from model list.

3. Enter any descriptio

n corresponding to the type of the printer in the

Type field. This is optional.

4. Speci

fy any printer description in the Description field. This is

optional.

5. Speci

fy printer location in the Location field.

6. Typ

e the IP address or DNS name of the printer in the Device text-

box for network-connected printers. On IBM AIX with je

tdirect

Queue type only DNS name is possible, numeric IP address is not

allowed.

7. Queue type sh

ows the connection as lpd or jetdirect in the corre-

sponding list box. Additionally us

b type is available on Sun Solaris

OS.

8. Select Copies to set the number of copies.

9. Check th

e Collate option to receive copies already sorted.

10. Check th

e Reverse Order option to receive copies in the reverse

order.

11. Check the Make Default option to set this printer as default.

12. Click OK to add

the printer.

IPV6 CONFIGURATION

TCP/IPv6 is supported properly only in Windows Vista or higher.

If the IPv6 network seems to not be working, set all the network setting

to the factory defaults and try again (See "Restoring factory default

settings using SyncThru™ Web Service" on page 38).

To use the IPv6 network environment, fol

low the next procedure to use the

IPv6 address:

1. Connect your machine to the network with a network cable.

2. T

urn on the machine.

3. Print a Con

figuration Report from the machine’s control panel that will

check IPv6 addresses (see "Printing configuration report" on page 36).

4. Select Start > Control Panel > Hardware and Sound > Printers > Add

Printer.

5. Click Ad

d a local printer on the Add Printer windows.

6. F

ollow the instruction on the window.

If the machine does not work in the network environment, activate

IPv6. Refer to the next section followed by.

Activating IPv6

1. Press Menu on the control panel.

2. Pre

ss the up/down arrow to highlight Network and press OK.

3. Pre

ss the up/down arrow to highlight TCP/IP (IPv6) and press OK.

4. Pre

ss the up/down arrow to highlight IPv6 Activate and press OK.

5. Pre

ss the up/down arrow to highlight On and press OK.

6. T

urn the machine off and turn it on again.

7. R

einstall your printer driver.

Setting IPv6 addresses

Machine supports following IPv6 addresses for network printing and man-

agements.

• L

ink-local Address: Self-configured local IPv6 address. (Address starts

with FE80.)

• Stateless Address: Automatically configured IPv6 address by a net-

work router.

• Stat

eful Address: IPv6 address configured by a DHCPv6 server.

• Ma

nual Address: Manually configured IPv6 address by a user.

DHCPv6 address configuration (Stateful)

If you have a DHCPv6 server on your network, you can set one of the

following option for default dynamic host configuration:

1. Pr

ess Menu on the control panel.

2. Pre

ss the up/down arrow to highlight Network and press OK.

3. Pre

ss the up/down arrow to highlight TCP/IP (IPv6) and press OK.

4. Pre

ss the up/down arrow to highlight DHCPv6 Config and press

OK.

5. Pre

ss the up/down arrow to access the required value.

• Router: Use DHCPv6 on

ly when requested by a router.

• DHCPv

6 Addresses: Always use DHCPv6 regardless of router

Samsung ML-551x Series Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung ML-551x Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info