586982
100
Zoom out
Zoom in
Vorherige Seite
1/130
Nächste Seite
Supplies and accessories_ 100
2. Pull the imaging unit out.
3. Remove the new imaging unit from its bag.
Do not use sharp objects, such as a knife or scissors, to open
the toner cartridge package. They might scratch the drum of
the cartridge.
To
prevent damage to the imaging unit, do not expose it to light
for more than a few minutes. Cover it with a piece of paper, if
necessary.
4. Thoroughly shake the imaging unit 5 or 6 ti
mes to distribute the toner
evenly inside the imaging unit.
5. Remove the protection cover and seal.
6. Hold the imaging unit by the handle and slowly insert the cartridge into
the opening in the machine.
Tabs on the sides of the imaging unit a
nd corresponding grooves within
the machine will guide the imaging unit into the correct position until it
locks into place completely.
Do not touch the green surface of the imaging unit.
To prevent damage to the imaging unit, d
o not expose it to light
for more than a few minutes. Cover it with a piece of paper, if
necessary.
7. Reinsert the toner cartridge.
8. Close the top cover. Make sure that the cover is securely closed.
NECESSARY PRECAUTIONS TO TAKE WHEN
INSTALLING ACCESSORIES
Disconnect the power cord.
To avoid the possibility of an electrical shock, always disconnect the
po
wer cord when installing or removing ANY internal or external acces-
sories.
Discharge static electricity.
T
he control board and internal accessories (network interface card or
memory modu
le) are sensitive to static electricity. Before installing or
removing any internal accessories, discharge static electricity from your
body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, repeat this procedure to discharge any static
electricity again.
Activatin
g the added accessories in the PS driver properties.
After installing an accessory such as an optional tray, PS driver users
must do the additiona
l setting. Go to the PS printer properties and set
the added accessory activated.
When installing accessories, the battery inside the machine is a ser-
vice component and needs to be replaced by an authorized servicer.
Do
not change it by yourself.
There is a risk of an explosion if battery is replaced by an incorrect
type.
ACTIVATING THE ADDED ACCESSORIES IN
PRINTER PROPERTIES
After installing added accessories, you need to select it in the printer proper-
ties of the printer driver in order to use it.
1. Install the driver (See "
Installing locally connected machine’s driver" on
page 32 or "Installing network connected machine’s driver" on page 38).
2. Click the
Windows St
art menu.
3. For Windows 2000, select Set
tings > Printers.
100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Samsung ML-551x Series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Samsung ML-551x Series

Samsung ML-551x Series Bedienungsanleitung - Deutsch - 137 seiten

Samsung ML-551x Series Bedienungsanleitung - Holländisch - 132 seiten

Samsung ML-551x Series Bedienungsanleitung - Französisch - 132 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info