Bedienungsanleitung Samsung ML-551x Series (Seite 102 von 130) (Englisch)

586982

102

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

Supplies and accessories_ 102

Configuring the machine’s wireless network

Before starting you will need to know the network name(SSID) of your wire-

less network and the network key if it is encrypted. This information was set

hen the wireless router(access point) was installed. If you do not know

about your wireless environment, please ask the person who has set up

your network.

To configure wireless parameters, you can use both control panel and

Syn

cThru™ Web Service.

Using the control panel

1. Press Menu on the control panel.

2. Press the

up/down arrow to highlight Network and press OK.

3. Press the

up/down arrow to highlight Wireless and press OK.

4. Press th

e up/down arrow to highlight WLAN Settings and press OK.

5. Press the

up/down arrow to highlight the setting option you want

appears and press OK.

• Wizard: The wireless network interface card in your printer

searches for wireless networks in the area and shows the results

(see "Wizard mode" on page 102).

• Custom: You can

configure the wireless settings according to

your needs (see "Custom mode" on page 102).

Wizard mode

1. The wireless network interface card on your machine searches for

wireless network in the area and shows the results.

2. Press the lef

t/right arrow to select a network you want to use in

Search List and press OK. You can select a network using SSID.

3. When None appears in WLAN Security on the display, press OK to

save your selection. go to step 6.

If you see another messages, go to the next step.

4. Dep

ending on the network you select, WLAN security encryption

type will be WEP or WPA.

• In case of WEP, Press the l

eft/right arrow to select Open System

or SharedKey.

- Open System: Authentication is not used, and Encryption

may or may not be used, depending on the need for data

security. Enter the WEP Key using number keypad after

selecting Open System.

- SharedKey: Authentication i

s used. A device that has a

proper WEP Key can access the network. Enter the WEP

Key using number keypad after selecting SharedKey.

• In case of WPA, Ent

er the WPA Key using number keypad. The

Key length should be between 8 to 63 characters long.

5. Press OK.

6. Press Stop/Clear to return to ready mode.

• SSID: SSID (Service Set Identifier) is a name that identifies a

wireless network. Access points and wireless devices attempt-

ing to connect to a specific wireless network must use the

same SSID. The SSID is case-sensitive.

• WEP: W

EP (Wired Equivalent Privacy) is a security protocol

preventing unauthorized access to your wireless network.

WEP encrypts the data portion of each packet exchanged on a

wireless network using a 64-bit or 128-bit WEP encryption key.

• WPA: WPA authorize

s and identifies users based on a secret

key that changes automatically at regular intervals. WPA also

uses TKIP (Temporal Key Integrity Protocol) and AES

(Advanced Encryption Standard) for data encryption.

Custom mode

1. Enter the SSID when Edit SSID appears on the top line of the dis-

play, the name that identifies a wire

less network. SSID is case-sensi-

tive so you need to enter it carefully. Press OK.

2. Select

the type of wireless connections. Press the left/right arrow to

select the method of Operation Mode you want and press OK.

• Ad-hoc: Allows wireless devices to communicate directly with

each other in a peer-to-peer environment. Go to step 3.

• Infrastructure: Allo

ws wireless devices to communicate with

each other through an access point. Go to step 4.

3. Pre

ss the left/right arrow to select the method of Channel you want

and press OK. If you select Auto, the wireless network interface card

on your machine will automatically adjust the channels.

4. Pre

ss the left/right arrow to select the method of WLAN Security

you want and press OK.

• None: Thi

s is used when the validation of a wireless device’s

identity and data encryption are not required for your network.

Open system is used for IEEE 802.11 authentication.

• Static WE

P: This uses the WEP (Wired Equivalent Privacy) algo-

rithm suggested by IEEE 802.11 standard for security. Static

WEP security

mode requires a proper WEP key for data encryp-

tion, decryption, and IEEE 802.11 authentication. Press the

left/right arrow to select the setup method you want in Authenti-

cation and press OK.

- Open

System: Authentication is not used, and encryption

may or may not be used, depending on the need for data

security. Enter the WEP Key using number keypad after

selecting Open System and then press OK.

- Sh

aredKey: Authentication is used. A device that has a

proper WEP Key can access the network. Enter the WEP

Key using number keypad after selecting SharedKey and

then press OK.

• WPA-PSK or WPA2-PSK: You can sele

ct WPA-PSK or

WPA2-PSK to authenticate the print server based on WPA

Pre-Shared Key. This uses a shared secret key (generally called

Pre Shared Key passphrase) which is manually configured on

the access point and each of its clients.

a. Press OK w

hen WPA-PSK or WPA2-PSK appears on the bot-

tom line of the display.

b. Press the up/down arrow to select TKIP or AES in

Encryption

and press OK. If you select WPA2-PSK, press the left/right arrow

to select AES or TKIP + AES in Encryption and press OK.

c. Enter the WPA Key usi

ng number keypad and press OK.

5. Whe

n you have finished, press Stop/Clear to return to the ready

mode. If you do not know about your wireless environment, please

ask the network administrator.

Disconnect the network cable (standard or crossover). Your

machine should then start communicating wirelessly with the net-

work. In case of Ad-hoc mode, you can use a wireless LAN and

wired LAN simultaneously.

Now go to "Installing network connected machine’s driver" on page 38.

Using SyncThru™ Web Service

For information about configuring and using the machine on a wireless

network environment, refer to the Wireless network install guide pro-

vided with the wireless network interface card. You can also configure

the network parameters on the SyncThru™ Web Service.

Samsung ML-551x Series Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Samsung ML-551x Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info