Side Controls
Wireless Camera
Side Controls
Sound Alarm Trigger
Adjust the sensitivity knob to set the sound alarm
sensitivity.
The receiver will beep to alert you when the sound is
above a preset sound level.
Adjust to increase or decrease the level of sensitivity.
Camera ON/OFF Switch
Turns the camera ON or OFF.
Camera on and low battery indication
Turn on the camera, the LED light will blink green once;
Low battery, the LED will blink repeatedly.
When the camera is turned on, the LED light would
appear green. After 2 seconds, it goes out.
Night vision sensor
Detects light levels where the camera is placed.
Talk Button
Press down and hold the button to talk back to the camera
currently being displayed on the LCD screen.
A/M record
Press to auto record or manual record during monitoring.
Only available when the Micro SD card is inserted. (Not included)
REC [A] : Start recording when an alarm is detected.
REC [M] : Start recording when the button is pressed.
Micro SD Card Compartment
Insert Micro SD card for video recording capavility. (Not included)
Night Light Button
Press to remotely turn on/off the night light on the camera (for the
camera currently being displayed on the LCD screen).
When the night light is on, an indication icon will be displayed on
the LCD screen.
Power Slide Switch
Slide the switch to ON or OFF position to switch on/off the
receiver.
Receiver ON and low battery indication
When the Unit is turned on the LED is solid green.
If the LED blinks then the battery charge is low. Please connect
to the AC power adapter to charge.
Charging Indication LED
A red LED shows battery is charging.
A Green LED shows battery is fully charged.
DC 5V Power Input
Connect the included AC power adapter to power and/or
charge the receiver battery (when the receiver is not placed in
the optional Charge cradle).
