621307
47
Zoom out
Zoom in
Vorherige Seite
1/70
Nächste Seite
English _47
SETUP SCREEN
Alarm input
You can set the alarm input type, activation time, and operation mode.
1. From the Setup menu, select the <Event (
)> tab.
2. Click <Alarm input>.
3. Set whether or not to <Enable>.
4. Select the type.
Normal open : It is normally open, but if it is closed, an
alarm will be triggered.
Normal close : It is normally closed, but if it is open, an
alarm will be triggered.
5. Specify the <Activation time>.
Always : Always check if an alarm occurs. It activates in
operated mode when the alarm occurs.
`
If set to <Always>, the activation time cannot be changed.
Only scheduled time : Check if an alarm occurs at a specified day of the week for a specified time
period. It activates in operated mode when the alarm occurs.
[Clear (
)] : Reset all settings.
Minute : Click an area in Activation Time and set the time
by minutes.
Hour : Drag your mouse at Activation Time and set the
time by hours.
6. Specify an operation that will perform if an alarm occurs.
FTP : Specify the use of FTP transfer in the alarm input
setup.
`
Refer to “FTP / E-mail for more details. (page 43)
E-mail : Specify the use of email transfer in the alarm input setup.
`
Refer to “FTP / E-mail for more details. (page 43)
Record : You can set up the alarm to record to a Micro SD card or an NAS when operating.
`
Set <Device> to <On> in <Storage>. (page 44)
Alarm output : Select whether to set the alarm output if an alarm is incoming, and specify the alarm
output time.
7. When done, click [Apply (
)].
Time schedule
You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of
the event.
1. From the Setup menu, select the <Event (
)> tab.
2. Click <Time schedule>.
3. Set whether or not to <Enable>.
4. Specify the <Transfer interval>.
5. Specify the <Activation time>.
Always : Always activates in operated mode at the set
interval.
Only scheduled time : Periodically activates in operated
mode at a specified time and date.
J
`
The transfer interval setting value must be smaller than the preset
activation interval to succeed in image transmission.
6. Specify the activation conditions.
FTP : Specify the use of the FTP transfer if an event occurs.
`
Refer to “FTP / E-mail for more details. (page 43)
7. When done, click [Apply (
)].
Tampering detection
You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing
direction, blocked lens and other overall change of scenes from the video.
1. From the Setup menu, select the <Event (
)> tab.
2. Click <Tampering detection>.
3. Set whether or not to <Enable>.
4. Set the tampering detection sensitivity. The higher the
sensitivity, detects the minutest tampering attempts.
5. Specify the activation time and activation condition.
`
For more information about <Activation time> and <Action>, refer to
Alarm input”. (page 47)
6. When done, click [Apply (
)].
J
`
The default tampering detection function may not work properly in
the following cases:
-
Under circumstances of simple background or low illumination and night time may lower the detection sensitivity.
-
A severe shaking of the camera or a drastic change to the illumination can be considered a tampering by mistake.
-
Detection of the tampering may take some time (maximum 5 seconds) right after the tampering was made.
-
Once a tampering is detected, the camera will resume a normal operating after a certain stability time (approx. 5 seconds)
during which no detection will be performed.
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Samsung SNV-6085R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info