Bedienungsanleitung Sangean RCR-30 (Seite 6 von 12) (Englisch)

797018

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

3. Press and hold the Info / Menu button until you hear a

beep (then release the button) to enter the menu setting.

4. Rotate the Tuning control knob until the FM AUTO /

MONO setting shows on the display. If the setting is

Auto press the Tuning control button and rotate the

Tuning control knob to switch to Mono mode to reduce

the hiss. Press and release the Tuning control button to

confirm the setting.

5. To return to Auto (Stereo) mode, press and hold the

Info / Menu button to enter the menu setting. Rotate the

Tuning control knob until the "FM MONO" shows on the

display. Press and release the Tuning control button and

rotate the Tuning control knob to select AUTO. Press and

release the Tuning control button to confirm the setting.

Presetting stations in AM / FM mode

There are 5 preset stations each for AM and FM radio.

They are used in the same way for each frequency band.

(Please note that 9 memory presets for each band can be

accessed via remote control.)

1. Press the Standby (main power) button to switch on

your radio.

2. Press the Source button to select the desired frequency

band. Tune to the required radio station as previously

described.

3. Press and hold the required Preset button until the

display shows “P4” for example after the frequency.

The station will be stored using the preset number .

Repeat this procedure for the remaining presets as you

wish.

4. Preset stations which have already been stored may

be overwritten by following the above procedure if

required.

Recalling a preset in AM / FM mode

1. Press the Standby (main power) button to switch on

your radio.

2. Select the required frequency band by pressing the

Source button.

3. Momentarily press the required Preset button to have

your radio tune to one of the stations stored in the

preset memory.

The display will show “EMPTY” if no station has been

stored to that preset.

NOTE

Listening to nature or soothing sounds

There are 27 different sounds for the Sound mode. (For

the Sound select button 1 / 2 / 4 / 5, each button has

5 different sounds. The Sound select button 3 has 7

different sounds.)

1. With your radio switched on, press the Source button

to select the Sound mode.

2. Press the Sound select button1-5 repeatedly to select

different sounds.

When the radio is in the standby mode, pressing the

Sound select button1-5 will turn on the radio and switch

to the corresponding sound.

NOTE

Sound select

button1-5 Nature or soothing sounds

- 1 RAIN DROPS

- 2 STREAM

- 3 OCEAN WAVES

- 4 WATER FLOW

- 5 WHALES

- 1 FROGS

- 2 CICADAS

- 3 WIND

- 4 BIRDS

- 5 BIRDS 2

- 1 WATER DROPS

- 2 BUBBLES

- 3 FIRE CRACKLING

- 4 TRAIN

- 5 WHITE NOISE

- 6 WHITE NOISE 2

- 7 FAN

- 1 SOOTHING SOUNDS

- 2 LULLABY

- 3 PIANO MUSIC

- 4 TWINKLE TWINKLE LITTLE STAR

- 5 PIANO MUSIC 2

- 1 SOOTHING SOUNDS 1

- 2 SOOTHING SOUNDS 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean RCR-30 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info