Bedienungsanleitung Sangean RCR-7WF (Seite 36 von 40) (Englisch)

528616

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Configuring the radio to use either an Ethernet or a

Wi-Fi connection

1. Turn on the radio, and press the Tuning+/- button until the display

shows <Setting>. (If necessary, press the Back button).

Then press the Select button.

2. Press the Tuning+/- buttons until it shows <Network Config>.

Then press the Select button.

3. Press the Tuning+/- buttons until it shows <Wired/Wireless>.

Then press the Select button.

4. Press the Tuning+/- buttons until it shows <Auto>. Then press the

Select button.

It will then attempt to establish an Ethernet connection to

the network. If no Ethernet connection is available the radio will

attempt to establish a Wi-Fi connection to the network.

Having established a particular type of connection to the network,

this connection will remain in use while the radio is on.

The Network Configuration menu also allows you to choose whether

or not the Internet radio displays a warning message when the Wi-Fi

signal strength is low. You can enable this feature by selecting

<Signal Warning> and then selecting “Yes”.

Configuring the radio only to use a Wi-Fi connection

1. Turn on the radio, and press the Tuning+/- button until the display

shows <Setting>. (If necessary, press the Back button).

Then press the Select button.

2. Press the Tuning+/- buttons until it shows <Network Config>.

Then press the Select button.

3. Press the Tuning+/- buttons until it shows <Wired/Wireless>.

Then press the Select button.

4. Press the Tuning+/- buttons until it shows <Wireless Only>.

Then press the Select button. And it will allow cause the radio to

restart and then to use only its WiFi connection to communicate

with the network. The radio will also disable its wired

network capabilities.

Selecting the ‘Wireless Only’ option will allow cause the radio to

restart and then only to use only its Wi-Fi connection to communicate

with the network. The radio will also disable its Ethernet connection.

Configuring the radio to stay connected to wireless while in

standby mode

1. Turn on the radio, and press the Tuning+/- button until the display

shows <Setting>. (If necessary, press the Back button).

Then press the Select button.

2. Press the Tuning+/- buttons until it shows <Network Config>.

Then press the Select button.

3. Press the Tuning+/- buttons until it shows <Wireless Standby

Power Mode>. Then press the Select button.

4. Press the Tuning+/- to select <YES> or <NO>

5. If selecting <YES>, the radio will stay connected to wireless while

in standby mode, if selecting <NO>, the radio will not stay

connected to wireless while in standby mode.

Note:

If your radio connects to the internet by a wired Ethernet connection

and you have selected “Wired Only” on the “Wired/Wireless”

configuration menu, then the menu will not have the

“Wireless Standby Power Mode” option.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean RCR-7WF Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean RCR-7WF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info