Bedienungsanleitung Sangean RCR-7WF (Seite 37 von 40) (Englisch)

528616

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Troubleshooting

If you have difficulty connecting the radio to your wireless network,

some of these steps may help to resolve the problem:

1. Confirm that a Wi-Fi connected PC can access the Internet

(i.e. can browse the web) using the same network.

2. Check that a DHCP server is available, or that you have configured

a static IP address on the radio. You can configure a static IP

address on the radio using the menu item “ Setting ->

Network Config -> Edit Config” , and then select ‘No’ for

‘Auto (DHCP)’.

(by pressing the Tuning+/- and the Select buttons)

3. Check that your network’s firewall is not blocking any

outgoing ports. As a minimum, the radio needs access to UDPand

TCPports 80, 554, 1755, 5000 and 7070. The use of Windows

Shares requires access to UDP and TCP ports 135 - 139 and 445.

Windows Media Player 11 will allocate a port number for UPnP

media sharing and will configure Microsoft’s Windows built-in

firewall appropriately.

Other firewall software may require configuration for UPnP or to

allow particular IP addresses to have trusted access.

4. Check that your access point does not restrict connections to

particular MAC addresses. You can view the radio’s MAC

address using the menu item “ Setting -> Network Config ->

View Config -> MAC address” . Note that the radio has both wired

and wireless MAC addresses.

5. If you have an encrypted network, check that you have entered

the correct key or pass-phrase into the radio. Remember that

text-format WPA keys are case sensitive. If your radio displays

‘Wireless error’ when attempting to connect to an encrypted

network followed by a 5-digit number, then please ensure that

you enter the correct pass-phrase for the network. If the

problem persists, then you may need to consult your

network configuration.

If your radio can connect to the network successfully, but is

unable to play particular stations, it may be due to one of the

following causes:

1. The station is not broadcasting at this time of the day

(remember it may be located in a different time zone).

2. The station has reached the maximum allowed number of

simultaneous listeners.

3. The Internet connection between your radio and the server

(often located in a different country) is slow.

4. The station is not broadcasting any more.

5. The link to the audio stream used by the radio is out of date.

6. The radio station is broadcasting using an audio format which is

not playable by your radio (although your radio does play almost

all formats used by regular broadcasters).

Try using a PC to play back the stream via the broadcaster’s

web site. If you can play back the station with a PC, use the form at

http://www. reciva.com to notify Reciva so that they can update the

station data that is used by the radio.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean RCR-7WF Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean RCR-7WF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info