Bedienungsanleitung Sangean U4D BT plus (Seite 15 von 16) (Englisch)

797387

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Using USB memory devices

1. Your radio is only designed to work with USB ash

memory devices. It is not intended to be connected

to hard disk drives or any other type of USB device.

2. It is possible to use SD or SDHC cards for media

playback when held in a suitable USB adaptor.

However, due to the wide variation of such adaptors,

it is not possible to guarantee that all adaptor / card

combinations will work with the radio.

3. The radio has been tested with a range of USB

memory devices of up to 32GB capacity. It supports

USB 2.0 full speed and USB 3.0. (Note: when using

USB 3.0, please allow the radio to detect the device

for a longer period of time.)

4. USB memory must use the FAT or FAT 32 filing

system in order to operate with the radio, it does not

support NTFS.

5. Audio formats supported for playback are MP3,

WMA and AAC. Playback does not support files

encoded using WMA lossless, WMA Voice, WMA 10

professional, nor les of any format which have DRM

protection.

IMPORTANT

1. In order to minimize the risk of damage to your radio,

your USB Memory, please place the radio such

that the device cannot easily be knocked while it is

inserted in the socket.

2. Remove the USB before carrying the radio or if not

using the USB feature for a prolonged period.

3. Turn off the radio before removing your USB memory

device.

4. The USB connection is intended only for flash

memory devices. The use of hard disk storage media

is not supported.

5. Playback via USB les stored on MP3 players is not

guarantee.

6. Large file size or high memory USB device takes

longer time to read.

CAUTION

PlayinglesfromUSBmemorydevices

1. Insert the USB memory device into the USB slot which

is located on the left hand side of the radio behind the

rubber cover.

2. Press the Power button to turn on the radio and Press

the Source button to select USB mode. The “Loading”

will appear on the LCD display. Then the radio will start

playing from the USB memory device.

NOTE

The text coding only supports ASCII.

3. To pause playing, press the Play / Pause button ( ).

To resume playing, press the Play / Pause button ( )

again.

a. If you turn off the radio, the next time the radio is

turned on, it will resume to the last played track.

b. If you switch to other mode when playing from the

USB memory device, playback will be paused. When

you switch to the USB mode again, playback will

resume from the point where it was paused.

c. It is recommended to store only music les (MP3 /

WMA / AAC) in your USB memory device. If there

is one folder contains le(s) other than music les,

your radio will skip this le / folder and the le / folder

number shown on the display will not be serial.

NOTE

Display modes

Your radio has a range of display mode while in USB

playback mode.

Press the Info button to cycle through the different options:

Folder and file numbers, Genre, Time, Date, Song title,

Artist name, Album name, Folder name, File name.

Selectingale

1. While the USB memory device is playing, press either

the Next track button ( ) or Previous track button (

) to change to the desired le. The le number is

updated on the display. If there’s more than one folder,

all les in the current folder should have been played

and the next folder will be played.

2. Press and hold the Next track button ( ) or

Previous track button ( ) to fast-forward / Rewind

the current track. Release the button when the desired

point in the track is reached.

To skip to another folder

With the USB memory device is in pause or play mode,

press and release the Next folder button ( ) or Previous

folder button ( ). The first file of the next or previous

folder will be played.

NOTE

If your USB contains a folder without files, the device

will skip the folder and play the les in the next folder.

Play Mode

When playing the les in the USB memory device, press

and release Play mode button to select:

Repeat 1 : repeatedly play the le you are listening

to.

Repeat Folder : repeatedly play the les within the

folder you are listening to.

Repeat All : repeatedly play the folders in the USB.

Random : it will play les in the USB by in random.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U4D BT plus Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U4D BT plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info