Bedienungsanleitung Sangean U4D BT plus (Seite 14 von 16) (Englisch)

797387

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

6. Press and release the Menu button to exit the software

version display.

USB socket for software upgrade

Software updates for your radio

may be available in the future. As

software updates become available

software and information on how to

update your radio can be found at

http://www.sangean.com

For more information, please contact

our Head Ofce by sending an email

to contact@sangean.com

1. Using the micro USB cable

(not supplied) to connect the

USB socket in the battery

compartment and your PC

USB port.

2. Go to the website above to download the latest

software. Follow the on-screen instructions on your PC

provided with the upgrade software to complete the

software upgrade.

System reset

If your radio fails to operate correctly, or some digits

on the display are missing or incomplete carry out the

following procedure.

1. Press the Power button to switch on your radio.

2. Press the Menu button until the Advanced menu of

current mode shows on the display.

3. Rotate the Tuning control until 'System' appears on the

display. Press and release the Tuning control.

4. Rotate the Tuning control until 'Factory Reset' appears

on the display. Press and release the Tuning control.

5. Rotate the Tuning control until 'Yes' is highlighted on

the display and press and release the Tuning control. A

full reset will be performed. The station list and presets

will be erased. Alarms will be cancelled and sleep timer

settings will be set to their default values. The display

will show 'Welcome to Digital Radio' and the unit will

behave as when rst switched on.

If you do not wish to carry out a system reset, highlight

'No' and then press the Tuning control. The display will

revert back to the previous display.

In case of malfunction due to electrostatic discharge,

reset the product using the above procedure. In some

circumstances it may be necessary to disconnect and

then reconnect the mains power in order to resume

normal operation.

Setting the Backlight timeout

Your radio can be set to timeout the backlight. The

backlight timeout setting can be adjusted between ON,10,

20, 30, 45, 60, 90, 120 and 180 seconds.

1. Access the menu for the current mode by pressing the

Menu button.

2. Rotate the Tuning control until 'System' appears on the

display. Press and release the Tuning control.

3. Rotate the Tuning control until ‘Backlight’ is shown on

the display. Press the Tuning control to enter the setting

menu.

4. Rotate the Tuning control to select the desired time.

The options are on (backlight will be on all the time),10,

20, 30, 45, 60, 90, 120, or 180 seconds.

5. Your radio will switch off the backlight after the preset

time has elapsed.

Auxiliary input socket

A 3.5mm Auxiliary input socket is provided on the right

side of your radio to permit an audio signal to be fed into

the unit from an external audio device such as an iPod,

MP3 or CD player.

1. Connect a stereo or mono audio source (for example,

iPod, MP3 or CD player) to the Auxiliary input socket

(marked 'Aux In').

2. Press the Power to switch on your radio.

3. Press the Source button until the Auxiliary Input band is

selected.

4. Adjust the Volume control on your iPod, MP3 or CD

player to ensure an adequate signal and then adjust

the volume on the radio for comfortable listening.

NOTE

Never use the Aux-In socket in rainy or moist conditions

to prevent moist from entering the radio. Always keep

the rubber cover on the back well closed under these

conditions.

Charging with USB socket

Your radio has a USB socket which is intended for

charging an iPhone, smart phone or similar devices.

Charge time may vary and in some cases may take longer

to charge than when using the manufacturers charging

unit supplied with the smart phone.

When using AC power cord and the radio is in power on or

standby mode or when using batteries only and the radio

is in power on mode, the radio can charge the iPhone,

smart phone or similar devices.

1. The USB jack can only provide power for the USB

memory stick only with 1A 5V maximum and most

of iPhone models. However, it does not support

external Hard disk drive, all types of mobile phones

and electronic device.

2. The maximum volume of the output power speaker

will decrease when your USB is charging.

NOTE

1. Do not connect this USB socket with your PC USB

port, as it highly possible may cause breakdown of

the unit.

2. Never use the USB socket in rainy or moist

conditions to prevent moist from entering the radio.

Always keep the rubber cover on the back well

closed under these conditions.

IMPORTANT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U4D BT plus Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U4D BT plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info