Bedienungsanleitung Sangean U4D BT plus (Seite 12 von 16) (Englisch)

797387

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

c. Rotate the Tuning control until 'Snooze Duration'

appears on the display. Press and release the

Tuning control.

d. Rotate the Tuning control to select the desired

snooze time. The options are 5, 10, 15, 20 minutes.

Press and release the Tuning control.

3. To cancel the snooze time while the alarm is

suspended, press the Power button.

Sleep function

Your radio can be set to turn off after a preset time has

elapsed. The sleep setting can be adjusted between 15,

30, 45, 60, 90 and 120 minutes.

1. Access the menu for the current mode by pressing the

Menu button.

2. Rotate the Tuning control until ‘Sleep’ is shown on the

display. Press the Tuning control to enter the setting

menu.

3. Rotate the Tuning control to select the desired sleep

time. The options are 15, 30, 45, 60, 90, or 12 0

minutes. Use the ‘Sleep Off’ option to cancel the

sleep function. Press the Tuning control to conrm the

setting.

4. Your radio will switch off after the preset sleep time has

elapsed.

5. To cancel the sleep function before the preset time has

elapsed, either set the sleep timer to off (step 1-3) or

press the Power button.

Automatically updating the clock

1. Press the Power button to switch on your radio.

2. Press and release the Menu button until the Advanced

menu of the current mode shows on the display.

3. Rotate the Tuning control until 'System' appears on the

display. Press and release the Tuning control.

4. Rotate the Tuning control until 'Time' appears on the

display. Press and release the Tuning control.

5. Rotate the Tuning control until 'Auto Update' appears

on the display. Press and release the Tuning control.

6. Rotate the Tuning control to choose an update option

from 'Update from Any', 'Update from DAB', Update

from FM' or 'No Update' as required. The current

update option will be marked with an asterisk. Press

and release the Tuning control to conrm your choice.

The radio will exit to the previous menu.

NOTE

If you select 'Update from Any', 'Update from DAB',

Update from FM' the current time received will be

displayed. If no signal is found you should either position

the radio or its antenna so that a signal can be received,

or revert to manual clock mode.

Setting the clock manually

Your radio will set its clock automatically using the DAB or

FM radio signal. If no signal is available and you need to

set the time manually, please follow the procedure shown

below.

1. Press the Power button to switch on your radio.

2. Press and release the Menu button until the

Advanced menu of the current mode shows on the

display.

3. Rotate the Tuning control until 'System' appears on

the display. Press and release the Tuning control.

4. Rotate the Tuning control until 'Time' appears on the

display. Press and release the Tuning control.

5. Rotate the Tuning control until 'Set Time / Date'

appears on the display.

6. Press and release the Tuning control. The hour digits

will ash on the display.

7. Rotate the Tuning control to set the desired hour.

Press and release the Tuning control.

8. The minute digits will ash on the display. Rotate the

Tuning control to set the desired minute. Press and

release the Tuning control.

● If the radio has been set to use a 12 hour format,

there will be an option here for setting AM or PM for

the clock time. Rotate the Tuning control to select

AM or PM. Press the Tuning control to conrm the

setting.

9. If the radio has been set to use a DD-MM-YYYY

date format (for example). The day will ash on the

display. Rotate the Tuning control to change the day

as needed. Press and release the Tuning control.

10. The month will ash on the display. Rotate the Tuning

control to set the current month. Press and release

the Tuning control.

11. The year will ash on the display. Rotate the Tuning

control to set the current year. Press and release

the Tuning control to confirm the clock setting. The

display will show 'Time Setup Saved' then exit the

menu.

NOTE

If the radio has been set to use a MM-DD-YYYY date

format, follow the steps above to set the month / day /

year setting.

Setting the time format

The display used in standby mode and when the radio is

in use can be set to 12 or 24 hour format. The selected

format is then also used when setting the alarms.

1. Press the Power button to switch on your radio.

2. Press and release the Menu button until the Advanced

menu of the current mode shows on the display.

3. Rotate the Tuning control until 'System' appears on the

display. Press and release the Tuning control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U4D BT plus Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U4D BT plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info