Bedienungsanleitung Sangean U4D BT plus (Seite 11 von 16) (Englisch)

797387

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Alarms

Your radio has 2 separate alarms which can be set to

wake you to DAB, FM radio or buzzer alarm. Each alarm

can be set to sound once, daily, on weekdays or at

weekends. The alarms can be set whether the radio is on

or in standby mode. In the event of a power interruption

your radio has a built in memory chip that will maintain

your alarm settings for when the power is restored.

Ensure that the time is set correctly before setting the

alarms.

NOTE

If no buttons are pressed for a while, the radio will exit

the alarm setup.

Setting an alarm

1. Press and release the Alarm 1 button to enter the

setting, ‘Alarm 1 Setup’ will show on the display and

alarm 1 icon will ash on the display. Or press and

release the Alarm 2 button to enter alarm 2 setting.

NOTE

If the time is not set before setting the alarms, “Time

is not set” will show on the display. Then use the

Tuning control to set the time and date. When the

setting is complete, proceed to step 2.

2. Press the Tuning control to enter the setting menu.

3. Rotate the Tuning control to select On or Off. If Off

is selected any current setting for that alarm will be

cancelled. With ‘On’ selected, press and release the

Tuning control to cause the alarm hour digits to ash

on the display.

4. Rotate the Tuning control to choose the desired hour

for the alarm and then press the Tuning control to

cause the alarm minute digits to ash on the display.

5. Rotate the Tuning control to choose the desired

minute for the alarm and then press the Tuning

control. If the radio has been set to the 12 hour clock

format, there will also be an option here for setting

AM or PM for the alarm time. Rotate the Tuning

control to select AM or PM. Press the Tuning control

to conrm the setting.

6. The alarm duration will flash on the display. Rotate

the Tuning control to choose the alarm duration.

Choose between 15, 30, 45, 60, 90 or 120 minutes.

Press and release the Tuning control to conrm the

alarm duration.

7. The alarm source option will flash on the display.

Rotate the Tuning control to choose the desired

source for the alarm (DAB, FM, Buzzer). Press the

Tuning control when the desired source alarm is

shown on the display. For which ever radio mode is

selected, the radio alarm may be set to any of the

stations which have been stored as presets or to the

station last listened to.

8. Press and release the Tuning control to conrm the

selection. The alarm day option will flash on the

display.

9. Your alarm can be set to sound once, daily, weekdays

and weekends.

Once - Will sound at one time only.

Daily - Will sound every day.

Weekdays - Will sound only on weekdays.

Weekends - Will sound only on weekends.

10. Rotate the Tuning control to choose the day option

and then press and release the Tuning control to

conrm the setting.

● If setting alarms to daily, weekdays or weekends

proceed to point 14.

● If selecting the alarm to once you will need to set

the day, month and year options as described from

step 11 -13.

11. Rotate the Tuning control to select the correct day

and then press the Tuning control to confirm the

setting.

12. Rotate the Tuning control to select the correct month

and then press the Tuning control to confirm the

setting.

13. Rotate the Tuning control to select the correct year

and then press the Tuning control to confirm the

setting.

14. Rotate the Tuning control to choose the desired

volume and press the Tuning control to conrm the

setting. Your radio will show 'Alarm Saved' and will

exit the alarm setting procedure.

NOTE

Active alarms are indicated in the display by the alarm

symbol (e.g. ). If the radio cannot connect to the radio

station, buzzer alarm will be used instead. The alarm

will sound for the selected duration unless cancelled.

Cancelling alarms

1. While am alarm is sounding, it can be cancelled by

pressing the Power button.

2. To cancel the alarm before going off, enter the alarm

setting wizard and set the alarm On / Off option to ‘Off’

(Please refer to previously described ‘setting an alarm’

section). Alternatively, press the required alarm button

and rotate the Tuning control to select ‘off.’ Press the

Tuning control to conrm the setting.

Snooze

1. When the alarm sounds, press any button other than

the Power button will silence the alarm for 5 minutes.

Remaining snooze time will show on the display.

2. You can also select your required snooze time, as

following:

a. Access the menu for the current mode by pressing

the Menu button.

b. Rotate the Tuning control until 'System' appears on

the display. Press and release the Tuning control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U4D BT plus Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U4D BT plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info