Bedienungsanleitung Sangean U4D BT plus (Seite 9 von 16) (Englisch)

797387

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Date Displays the current date.

NOTE

If no RDS information is available, the radio will be

unable to display the station name, scrolling text and

programme type information.

Scansensitivitysetting–FM

Your radio includes a local / distant option for the auto-

scan function. By setting the radio to the 'local' scan option,

weaker signals from more distant transmitters can be

ignored by the radio, making stronger signals easier to nd.

1. Press and release the Power button to switch on your

radio.

2. If needed, press and release the Source button until

the FM band is selected.

3. Press and release the Menu button until the Advanced

FM menu shows on the display.

4. Rotate the Tuning control until ‘FM Scan Zone’ shows

on the display. Press and release the Tuning control to

enter the scan sensitivity adjustment mode. The current

setting will be marked with an asterisk.

5. Rotate the Tuning control to switch between 'Local'

(Strong stations only) and 'Distant' (All stations) options

on the lower line of the display. The Distant option will

allow the radio to nd weaker signals when scanning.

6. Press and release the Tuning control to confirm your

selection. The Local or Distant setting is stored in the

radio and remains in force until changed or until a

System Reset.

Presettingstations–DABandFM

You may store your preferred DAB and FM radio stations

to the preset station memories. There are 10 memory

presets in your radio 5 for DAB and 5 for FM. Presets are

memorized by your radio in the event of a power failure.

The procedure for setting presets and using them to

tune stations is the same for FM and DAB mode, and is

described below.

1. Press the Power button to switch on the radio.

2. Press the Source button to select the DAB or FM

waveband.

3. Tune to the required station as previously described.

4. Press and hold the Preset button until the display

shows, such as,‘Preset 1 stored.’The station will

be stored under the chosen preset button. Repeat

this procedure as needed for the remaining presets.

Stations stored in preset memories may be overwritten

by following the above procedure.

Recallingapresetstation–DABand

1. Press the Power button to switch on the radio.

2. Press and release the required waveband by pressing

the Source button.

3. Press and release the required Preset button to

cause your radio to tune to the station stored in preset

memory.

NOTE

The display will show 'Preset Empty' if no station has

been stored to that preset.

Listening to music via Bluetooth

streaming

You need to pair your Bluetooth device with your radio

before you can auto-link to play / stream Bluetooth music

through your U4 DBT+. Paring creates a 'bond' so two

devices can recognize each other.

PairingyourBluetoothdeviceforthersttime

1. Press the Power button to switch on the radio.

2. Press the Source button to select the Bluetooth mode.

The Bluetooth status indicator ( ) on the panel

ashes blue to show the radio is discoverable.

3. Activate Bluetooth on your device according to the

device's user manual to link to the radio. Locate the

Bluetooth device list and select the device named ‘U4

DBT+’. With some mobiles (which are equipped with

earlier versions than BT2.1 Bluetooth device, you may

need to input the pass code “0000”).

4. Once connected, the Bluetooth icon will remain in solid

blue. You can simply select and play any music from

your source device. Volume control can be adjusted

from your source device, or directly on your radio.

1. If 2 Bluetooth devices, pairing for the rst time, both

search for your radio, it will show its availability on

both devices. However, if one device links with this

unit rst, then the other Bluetooth device won't nd it

on the list.

2. If you take your source device out of range, the

connection will be temporarily disconnected to your

radio. Your radio will automatically reconnect if the

source device is brought back in range. Be aware

that during the period of disconnection, no other

Bluetooth device can pair or link with your radio.

3. If ‘U4 DBT+’ shows in your Bluetooth device list but

your device cannot connect with it, please delete

the Sangean U4 DBT+ item from your list and pair

the device with the radio again following the steps

described previously.

4. The effective operation range between the system

and the paired device is approximately 10 meters

(30 feet). Any obstacle between the system and the

device can reduce the operational range.

5. Bluetooth / NFC connectivity performance may vary

depending on the connected Bluetooth devices.

Please refer to the Bluetooth capabilities of your

device before connecting to your radio. All features

may not be supported on some paired Bluetooth

devices.

NOTE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U4D BT plus Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U4D BT plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info