Bedienungsanleitung Sangean U4D BT plus (Seite 8 von 16) (Englisch)

797387

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

1. Press the Power button to switch on your radio.

2. Press the Source button as needed to select DAB radio

mode.

3. Press the Menu button to enter the Advanced DAB

menu shows on the display.

4. Rotate the Tuning control until 'Station Order' is shown

on the display.

5. Press the Tuning control to enter the station order

adjustment mode.

6. Rotate the Tuning control to choose 'Alphanumeric',

'Ensemble' or 'Valid'.

'Alphanumeric' - sorts the station list alpha-numerically

0...9 A...Z.

'Ensemble' - organizes the station list by DAB multiplex.

'Valid' - shows only those stations for which a signal

can be found.

The current setting is indicated by an asterisk.

7. Press the Tuning control to select the required station

order.

Prunestations–DAB

Over time, some DAB services may stop broadcasting,

or may change location and then not be able to receive

a station. In order to remove such stations from the DAB

station list, the Prune stations function will delete the

DAB stations from your station list that can no longer be

received.

Stations which cannot be found or which have not been

received for a very long time are shown in the station list

with a question mark.

1. Press the Power button to switch on your radio.

2. Press and release the Source button until the DAB

mode is selected.

3. Press and release the Menu button until the Advanced

DAB menu shows on the display.

4. Rotate the Tuning control until 'Prune' appears on the

display. Press and release the Tuning control to enter

the setting.

5. Rotate the Tuning control to highlight 'Yes'. Press and

release the Tuning control to cause the stations list to

be pruned, eliminating unavailable stations.

6. If you do not wish to prune stations highlight 'No' in

step 5 and then press and release the Tuning control.

The display will revert back to the previous display.

NOTE

If you have moved to a different part of the country you

should also carry out a search for new stations (please

see the section 'Finding new stations' in the previous

section).

Operatingyourradio–FMauto-tune

1. Straighten up the antenna.

2. Press the Power button to switch on your radio.

3. Press and release the Source button until the FM band

is selected.

4. To scan up in frequency, rst rotate the Tuning control

knob in a clockwise direction and then press the

Auto tune button. Your radio will scan in an upwards

direction (low frequency to high frequency) and stop

automatically when it finds a station of sufficient

strength.

To scan down in frequency, first rotate the Tuning

control knob in an anti-clockwise direction and then

press the Auto tune button. Your radio will scan in a

downwards direction and stop automatically when it

nds a station of sufcient strength.

5. After a few seconds the display will update. The display

will show the frequency of the signal found. If the signal

is strong enough and there is RDS data present then

the radio may display the station name.

6. To find other stations press the Auto tune button as

before. When the end of the waveband is reached,

your radio will recommence tuning from the opposite

end of the waveband.

7. Adjust the Volume to the required setting.

8. To switch off your radio, press the Power button.

NOTE

If you nd that FM reception is poor, try repositioning the

antenna.

Manualtuning–FM

1. Straighten the antenna.

2. Press the Power button to switch on your radio.

3. Press and release the Source button until the FM band

is selected.

4. Rotate the Tuning control to tune to a station. The

frequency will change in steps of 50kHz. If the radio is

tuned to a station of sufcient signal strength with RDS

information present, then the display may change to

show the station name.

5. When the waveband end is reached the radio will

recommence tuning from the opposite waveband end.

6. Set the Volume to the desired setting.

Displayoptions–FM

Your radio has a range of display options for FM mode:-

The Radio Data System (RDS) is a system in which

inaudible digital information is transmitted in addition to

the normal FM radio programme. RDS offers several

useful features. The following are available on your radio.

1. Press and release the Info button to cycle through the

various options.

Scrolling text

Displays scrolling text messages

such as artist / track name, phone in

number, etc.

Programme type

Displays type of station being

listened to e.g. Pop, Classic, News,

etc.

Frequency Displays the frequency of the station

being listened to.

Time Displays the current Time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U4D BT plus Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U4D BT plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info