Bedienungsanleitung Sangean U4D BT plus (Seite 7 von 16) (Englisch)

797387

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Display modes

Your radio has a range of display options when in DAB

mode:-

1. Press the Info button to cycle through the different

options.

Text

Displays text messages such as the

artist or track name, phone in number,

trafc alerts, etc.

Program Type

Displays the type of station being

listened to such as Pop, Classic, News

etc.

Multiplex

Name

Displays the name of the DAB multiplex

to which the current station belongs.

Time Displays the current Time.

Date Displays the current date.

Frequency &

channel

Displays frequency and channel

number for the currently tuned DAB

station.

Bit rate and

audio type

Displays the digital bit rate and audio

coding information for the station being

listened to.

Signal strength

Displays the signal strength of radio

reception. The clear unfilled rectangle

indicates minimum signal level required

for satisfactory reception.

Signal error

Displays the signal error for the station

being listened to. A lower error number

indicates a better quality of radio signal.

Findingnewstations–DAB

From time to time, new DAB radio stations may become

available. Or you may have moved to a different part of

the country. In this case you may need to cause your

radio to scan for new stations.

1. Press and release the Menu button until the Advanced

DAB menu shows on the display.

2. Rotate the Tuning control until ‘Full Scan’ is shown on

the display.

3. Press the Tuning control to initiate the scan. The

display will show 'Scanning' and your radio will perform

a scan of the DAB Band III frequencies. As new

stations are found the station counter will increase

and stations will be added to the list. The bar graph

indicates the progress of the scan.

4. Alternatively press Auto tune button to scan for new

stations.

Manualtuning–DAB

Manual tuning allows you to tune your radio to a particular

DAB frequency in Band III. Any new stations found will be

added to the station list. This function can also be used

to assist the positioning of the antenna or the radio to

optimize reception for a specic channel or frequency.

1. Press and release the Menu button until the Advanced

DAB menu shows on the display.

2. Rotate the Tuning control until the display shows

'Manual Tune'.

3. Press and release the Tuning control to enter the

manual tuning mode.

4. Rotate the Tuning control to select the desired DAB

channel.

5. Press and release the Tuning control. The open block

in the signal strength graph shows the minimum signal

strength needed for good DAB reception. The signal

blocks will go up and down showing the changing

signal strength as you adjust the antenna or the radio

position. Any new radio stations found on the tuned

DAB multiplex will be added to the list stored in the

radio.

6. Press and release the Tuning control to return to

normal tuning mode.

DynamicRangeControl(DRC)–DAB

The DRC facility can make quieter sounds easier to hear

when your radio is used in a noisy environment.

There are three levels of compression:

DRC Off: No compression applied. (default).

DRC High: Maximum compression applied.

DRC Low: Medium compression applied.

1. Press the Power button to switch on your radio.

2. Press and release the Source button until the DAB

band is selected.

3. Press and release the Menu button until the Advanced

DAB menu shows on the display.

4. Rotate the Tuning control until 'DRC' appears on the

display. Press and release the Tuning control. The

display will show the current DRC value which will be

marked with an asterisk.

5. Rotate the Tuning control to select the required DRC

setting (default is off).

6. Press and release the Tuning control to confirm the

setting. After several seconds the display will return to

the normal radio display.

NOTE

Not all DAB broadcasts are able to use the DRC

function. If the broadcast does not support DRC, then

the DRC setting in the radio will have no effect.

Station order setup

Your radio has 3 station order settings from which you

can choose. The station order settings are alphanumeric,

ensemble and valid.

NOTE

The default station order on your radio is alphanumeric.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean U4D BT plus Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean U4D BT plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info