Bedienungsanleitung Sangean WFR-32 (Seite 7 von 19) (Englisch)

797030

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

8 T U V t u v

9 W X Y Z w x Y z

4. GETTING STARTED

CONNECTING THE AC POWER ADAPTER

The WFR-32 can be powered using the supplied power

adapter. Before connecting the AC power adapter to a

wall socket, please ensure that the voltage that the socket

supplies is within the supported range (100~240 Vac,

50/60Hz).

If the wall socket does supply a voltage that is within the

supported range, first connect the small plug of the power

cord to the DC IN socket (18) on the radio, then connect

the AC power adapter to the wall socket and turn on the

Power Switch (19) at the back of the radio.

INITIAL SETUP

After the radio has been supplied with power, it will

automatically turn on. “Sangean” will be shown on the

radio’s display (12) and a bar below this message will

indicate the progress of the startup process.

Once the radio has finished starting up, it will immediately

switch over to the initial setup process. During the initial

setup process, the startup wizard will guide you through

the configuration of the language of the on-screen menus

and the network configuration of the radio.

SETTING THE MENU LANGUAGE

Once the language selection 22:36

1/18

English

Deutsch

Español

Français

menu appears on the display.

The English language is the

default language and is

therefore highlighted by default.

Select the desired language as

described previously in the

“NAVIGATION AND TEXT

INPUT” section in chapter 3. After selecting the desired

language, the radio will display all menus in the selected

language.

THE MOBILE APP’S PRIVACY POLICY

Next, the radio will display a QR 12:00AM

Scan QR code or Visit:

WWW.mediayou.net

/policy.php

Privacy

:OK

code and the URL

https://www.mediayou.net/

policy.php to direct you to the

Be sure to read this Policy

before using the online

functionality of the radio and only use the internet radio

feature if you agree to all terms and conditions in the

radio feature and use the radio for playback in other

modes instead.

Press the Volume control (4) or Enter button (s) to

continue setting up the radio using the setup wizard.

CONFIGURING THE NETWORK

CONNECTION

When configuring the network 12:00AM

Enable ’Check Network

when Power On’ ?

Yes

connection, the first question

the setup wizard will ask is

whether you want it to check for

network connections when your

turn the radio on. There are two

options here:

1. Yes: The radio will automatically scan for Wi-Fi

networks when it is turned on and it is not or cannot

connect to networks it has previously connected to.

2. No: The radio will not automatically scan for Wi-

Fi networks when it is turned on and is not already

connected to a network that it has previously connected

to. In this case, you will have to connect to a network

manually using the radio’s menu.

Next, the wizard will ask if you 12:00AM

Would you like to

configure Network now?

YesAPP WPSNo

want to configure the network

now. There are four options to

choose from here:

1. Yes: The radio will scan for

nearby Wi-Fi networks. After

scanning is completed, select

your network from the list and enter the password as

previously described. After entering the password, the

radio will connect to the network. The setup wizard has

now been completed and the radio will switch over to

the main menu.

2. APP: This option will display a QR code that, when

scanned, takes you to a page with instructions on

how to install the AirMusic Control mobile app on your

Android or iOS device and how to then connect the

radio to your Wi-Fi network. Follow these instructions

to successfully connect the radio to your Wi-Fi network.

After the radio has been connected to the network, the

setup wizard has been completed and the radio will

switch over to the main menu.

3. WPS: If your router supports WPS (refer to the

instruction manual of your router), you can also use the

WPS feature to connect the radio to your Wi-Fi network.

After selecting WPS, press the WPS button on your

router within 120 seconds to establish a connection

between the 2 devices. Once the connection is

established, the setup wizard is now completed and the

radio will switch over to the main menu.

4. No: Select no if you do not want to connect the radio

to the Wi-Fi network at this point in time. When not

connected to a Wi-Fi network, the radio can still be

used to playback audio in both the Bluetooth and the

Aux in mode. In addition, the radio can be connected to

a Wi-Fi network at any time by using the menus on the

radio.

After finishing this step, the setup wizard is completed.

The radio’s time and date will automatically be set if you

have connected to a Wi-Fi network and your radio is

now ready for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sangean WFR-32 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sangean WFR-32

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info