Bedienungsanleitung Sanyo PDG-DWL2500 (Seite 6 von 82) (Englisch)

489447

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

All the safety and operating instructions should be read

before the product is operated.

Read all of the instructions given here and retain them

for later use. Unplug this projector from AC power supply

before cleaning. Do not use liquid or aerosol cleaners.

Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the pro-

jector.

For added protection to the projector during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet. This will

prevent damage due to lightning and power line surges.

Do not expose this unit to rain or use near water... for

example, in a wet basement, near a swimming pool, etc...

Do not use attachments not recommended by the manu-

facturer as they may cause hazards.

Do not place this projector on an unstable cart, stand, or

table. The projector may fall, causing serious injury to a

child or adult, and serious damage to the projector. Use

only with a cart or stand recommended by the manufac-

turer, or sold with the projector. Wall or shelf mounting

should follow the manufacturer’s instructions, and should

use a mounting kit approved by the manufacturers.

An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

Slots and openings in the back and bottom of the cabinet

are provided for ventilation, to ensure reliable operation of

the equipment and to protect it from overheating.

The openings should never be covered with cloth or other

materials, and the bottom opening should not be blocked

by placing the projector on a bed, sofa, rug, or other simi-

lar surface. This projector should never be placed near or

over a radiator or heat register.

This projector should not be placed in a built-in installa-

tion such as a book case unless proper ventilation is pro-

vided.

Never push objects of any kind into this projector through

cabinet slots as they may touch dangerous voltage points

or short out parts that could result in a fire or electric

shock. Never spill liquid of any kind on the projector.

Do not install the projector near the ventilation duct of

air-conditioning equipment.

This projector should be operated only from the type

of power source indicated on the marking label. If you

are not sure of the type of power supplied, consult your

authorized dealer or local power company.

Do not overload wall outlets and extension cords as this

can result in fire or electric shock. Do not allow anything

to rest on the power cord. Do not locate this projector

where the cord may be damaged by persons walking on

it.

Do not attempt to service this projector yourself as open-

ing or removing Covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified

service personnel.

Unplug this projector from wall outlet and refer servicing

to qualified service personnel under the following condi-

tions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally by follow-

ing the operating instructions. Adjust only those con-

trols that are covered by the operating instructions

as improper adjustment of other controls may result

in damage and will often require extensive work by a

qualified technician to restore the projector to normal

operation.

e. If the projector has been dropped or the cabinet has

been damaged.

f. When the projector exhibits a distinct change in perfor-

mance-this indicates a need for service.

When replacement parts are required, be sure the ser-

vice technician has used replacement parts specified by

the manufacturer that have the same characteristics as

the original part. Unauthorized substitutions may result in

fire, electric shock, or injury to persons.

Upon completion of any service or repairs to this projec-

tor, ask the service technician to perform routine safety

checks to determine that the projector is in safe operat-

ing condition.

NOTE FOR CUSTOMERS IN THE US

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN

MERCURY AND MUST BE RECYCLED OR DIS-

POSED OF ACCORDING TO LOCAL, STATE OR

FEDERAL LAWS.

Safety Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo PDG-DWL2500 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sanyo PDG-DWL2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info