Bedienungsanleitung Sanyo PDG-DWL2500 (Seite 7 von 82) (Englisch)

489447

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

Openings in the cabinet are provided for ventilation.

To ensure reliable operation of the product and to

protect it from overheating, these openings must not

be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When

using or installing the projector, the following

precautions should be taken.

– Do not put any flammable object or spray can near

the projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from

any objects.

– Do not touch a peripheral part of the exhaust vent,

especially screws and metallic parts. These areas

will become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on

the cabinet will not only get damaged but also may

cause fire hazard by heat.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the

temperature inside the projector.

Air Circulation

Air Flow

Exhaust Vent

(Hot air exhaust)

Moving the Projector

CAUTION IN CARRYING OR

TRANSPORTING THE PROJECTOR

– Do not drop or bump the projector, otherwise

damages or malfunctions may result.

– When carrying the projector, use a suitable case.

– Do not transport the projector by courier or any

other transport service in an unsuitable transport

case. This may cause damage to the projector.

For information about transporting the projector by

courier or any other transport service, consult your

dealer.

– Do not put the projector in a case before it is

cooled enough.

When moving the projector, retract adjustable feet to

prevent damage to the cabinet. When the projector is

not in use for an extended period, put it into a suitable

case.

Handle the projector carefully; do not drop, bump,

subject it to strong forces, or put other things on the

cabinet.

Safety Instructions

The projector uses a lamp which generates significant

heat. The cooling fans and air vents are provided to

dissipate the heat by drawing air into the housing and

the filter is located in the intake vents to prevent dust

from getting inside of the projector.

In order to care for the projector appropriately, regular

cleaning is required. Remove any dirt or dust that has

accumulated on the projector.

If the projector reaches a time set in the timer setting,

a Filter warning icon (Fig. 1) appears on the screen,

indicating that the filter replacement is necessary.

Blocking the air vents and leaving the projector

uncleaned for a long time may not only damage the

projector and may require costly repairs but may also

cause accidents or fire.

For maintenance of the filter, refer to “Filter counter”

on page 62 and “Maintenance and Care” on page 65.

Damages to the projector caused by using an

uncleaned filter or improper maintenance will void the

warranty on the projector.

Filter Maintenance

Fig.1 Filter warning icon

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo PDG-DWL2500 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sanyo PDG-DWL2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info