Bedienungsanleitung Sanyo PT-RS11K (Seite 159 von 219) (Englisch)

598873

159

Zoom out

Zoom in

Vorherige Seite

1/219

Nächste Seite

Chapter 4 Settings — [NETWORK] menu

ENGLISH - 159

[DIGITAL LINK MENU]

When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected

to the <DIGITAL LINK/LAN> terminal, the main menu of the connected DIGITAL LINK output supported device is

displayed. Refer to the Operating Instructions of the DIGITAL LINK output supported device for details.

Note

f [DIGITAL LINK MENU] cannot be selected when [EXTRON XTP] is set to [ON].

f The operation guidance for the “RETURN” button is in the menu screen of the Digital Interface Box and DIGITAL LINK Switcher. The

projector does not have the “RETURN” button, but the same operation is available with the <MENU> button.

[Art-Net SETUP]

Make settings to use the Art-Net function.

1) Press as to select [Art-Net SETUP].

2) Press qw to select an item.

f The items will switch each time you press the button.

[OFF] Disables the Art-Net function.

[ON(2.X.X.X)] Enables the Art-Net function and sets the IP address to 2.X.X.X.

[ON(10.X.X.X)] Enables the Art-Net function and sets the IP address to 10.X.X.X.

[ON(MANUAL)] Enables the Art-Net function and uses the IP address set in [NETWORK SETUP].

f When other than [OFF] is selected, proceed to Step 3).

3) Press the <ENTER> button.

f The [Art-Net SETUP] screen is displayed.

4) Press as to select an item, and press qw to switch the setting.

[NET] Enter [NET] to be used when the projector processes Art-Net.

[SUB NET] Enter [SUB NET] to be used when the projector processes Art-Net.

[UNIVERSE] Enter [UNIVERSE] to be used when the projector processes Art-Net.

[START ADDRESS] Enter [START ADDRESS] to be used when the projector processes Art-Net.

5) Press as to select [STORE], and press the <ENTER> button.

6) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

Note

f If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically.

[Art-Net CHANNEL SETTING]

Set the assignment of the channel.

For the channel denitions used for controlling the projector with the Art-Net function, refer to “Using Art-Net

function” (x page 193).

1) Press as to select [Art-Net CHANNEL SETTING].

2) Press qw to switch the item.

[2] Uses the channel assignment in standard setting.

[USER] Changes the channel assignment.

[1]

Uses the channel assignment with DZ21K series compatible.

DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series

f When [2] or [1] is selected, pressing the <ENTER> button displays the function assigned to the channel.

f When [USER] is selected, proceed to Step 3).

3) Press the <ENTER> button.

f The [Art-Net CHANNEL SETTING] screen is displayed.

4) Press as to select the channel to set, and pressqw to switch the item.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sanyo PT-RS11K Seite 159

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sanyo PT-RS11K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info