Bedienungsanleitung Satel CA-10 (Seite 37 von 43) (Englisch)

699577

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

CA-10 Installer Manual 35

In order to begin configuration, click on the icon to open the „Configuration” window.

The „Port RS-232” tab permits selecting the computer port number in the case of

direct programming through the panel RS port. If the control panel is being

programmed by means of the modem, select the „Modem” tab and click on the „Details”

button.

After opening the „Modem” window, select the corresponding modem type or click on the

„! Change” button to enter data according to the documentation of your modem. Entering

a new name and initialization path, and confirming it with the „OK” button makes it possible

to add new settings to the list of modems. After clicking on the „! Change” button you can

also change the communication port number and the maximum transmission rate.

The „



Test” button permits checking interaction between the modem and the program – it

opens a window containing information on modem initialization.

Having properly initialized the operation, close the configuration windows.

In order to start communication through the RS port, follow the instructions contained in

section „Programming the control panel from the computer”.

The modem communication can be started by clicking on the icon (or selecting the

„MODEM” command from the „COMMUNICATION” menu). The program will open a dialog

box enabling connection to be established and will prompt the further course of action.

For details see the section „Remote programming – DOWNLOADING”.

The type of control panel is recognized automatically on establishing connection, or can be

selected through the “File” menu.

Calling the function of reading the control panel data (icon ) after the communication has

been established may speed up the subsequent process of saving the changes made in the

control panel programming.

DEFAULT SETTINGS

Control panel configuration (restore with FS 107 function):

• one partition including all the available zones (Z1 to Z10),

• zone 1 (Z1) – ENTRY/EXIT function, EOL (End Of Line Resistors),

• zones 2 to 8 (Z2 ... Z8), 9, 10 (Z1 & Z2 in partition 1 keypad) – INSTANT function, EOL,

• zones 11 to 16 – not used,

• sensitivity of all zones – 0.48 sec.,

• PRIORITY option activated for all zones (FS 27, first option),

• other zone options deactivated, detector operation testing disabled,

• output OUT1 – BURGLARY ALARM function, operation time equal to global time,

polarity +12V, assigned to all zones (audible signaling),

• output OUT2 – BURGLARY ALARM function, operation time before cleared, polarity

+12V, assigned to all zones (visual signaling),

• output OUT3 – detectors power supply,

• output OUT4 – not used,

• output OUT5 – READY STATUS function (for all zones),

• output OUT6 – telephone usage status function (OUT5 & OUT6 output functions are

connected with testing the panel during production process),

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-10 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info