Bedienungsanleitung Satel CA-10 (Seite 20 von 60) (Englisch)

699577

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

18 Programming SATEL

FS10 - zones assignment to partition 3 (BIT)

FS11 - zones assignment to partition 4 (BIT)

The functions FS8 - FS11 are used to divide the alarm system into partitions. Description of

the control panel division into partitions - see the Installer Manual.

In the LED keypads, the zones are assigned to a partition in two stages. In the first stage

(LED 12 blinking), the zones from 1 to 8 are programmed, in the second stage (LED 11

blinking), the zones from 9 to 16 are programmed (LED 1 indicates then zone 9, LED 2 -

zone 10, etc.). You can proceed to the second stage by pressing the key [#]. Assignment of

the zones to a partition is effected by pressing the keys from 1 to 8 and indicated by lighting

of the LED representing the particular zone. Having programmed all the zones, press the key

[#] to save the entered data and quit the function.

In the LCD keypads, the zones can be assigned to partitions by entering the corresponding

zone number (zones 1-9 by pressing the numeric key, zones 10-16 by pressing, in turn, the

key [

] and the numeric key from 0 to 6, zones 10-16 being displayed by means of letters A

to G), or using the arrow keys (arrows ◄ and ► enable movement of the cursor, arrow ▼

assigns a zone to or deletes a zone from partition, while arrow ▲ displays the name of zone

selected by the cursor). Pressing the key [#] will result in saving the entered data and quitting

the function.

FS12 - programming zones displayed in partition 1 keypad (BIT)

FS13 - programming zones displayed in partition 2 keypad (BIT)

FS14 - programming zones displayed in partition 3 keypad (BIT)

FS15 - programming zones displayed in partition 4 keypad (BIT)

Provision is made in the control panel for optional selection of the zones to be displayed in

the given keypad. This option refers mainly to the LED keypads i.e. to the CA-10-KLED and

the CA-10-KLED-S, which was produced until February 2006 (they display the status of 12

out of 16 zones). In the newest CA-10-KLED-S keypads (version 2.2 and latest) this function

has no meaning since the state of all zones from 1 to 16 is displayed. In the LCD keypads,

the functioning of this option is limited to the mode of LED standard display. The zones

which are to be shown in the keypad are displayed in the ascending order, while the zones

which are not to be shown are skipped. For example, if the zones 2, 3, 5 and 7 are selected

for display in the keypad, the status of zone 2 is displayed on the first LED, zone 3 status –

on the second, zone 5 – on the third, zone 7 – on the fourth, while the other LEDs will remain

unused.

The programming is similar to that in FS8 – FS11 (zones assignment to partition).

FS16 - programming auto-bypassed zones in partition 1 (BIT)

FS17 - programming auto-bypassed zones in partition 2 (BIT)

FS18 - programming auto-bypassed zones in partition 3 (BIT)

FS19 - programming auto-bypassed zones in partition 4 (BIT)

The functions 16 to 19 apply to the zones which are automatically bypassed after silent or

loud arming with the authority level 7 code (partial arming). The programming is similar to

that in FS8 – FS11.

Note: The zones to be bypassed at no exit from the partition are programmed with the

service functions FS 127

130 (EXIT-BYPASS).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-10 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info