Bedienungsanleitung Satel CA-5 Plus (Seite 13 von 27) (Englisch)

699583

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

CA-5 SATEL

an example of estimated balance of current consumption by the system, and an example of

battery selection.

The CA-5 mainboard enables an electric shock protection circuit (grounding) to

be connected. The protective cable terminal is designated by the symbol.

The „neutral” wire of the 230 V AC mains supply must not be connected to it.

If the site has no separate electric shock protection circuit, this terminal must be

left free.

The telephone line must be a four-wire line so that the control panel can be connected

before the other devices (telephone, telefax, etc.).

Do not send telephone signals and alarm system signals by one multicore cable.

This may result in a damage to the system in case of a high-voltage punch-

through from the telephone line.

The CA-5 control panel should be installed in enclosed spaces with a normal humidity of air.

It can be mounted in the CA-6 OBU housing with a transformer designed

for operation with the control panel power supply, which permits

installation of a battery with 7 Ah capacity. Before the housing is secured

to the base, it is necessary to mount inside the housing plastic distance

plugs, which are intended for subsequent installation of the mainboard.

In case the plugs tend to slip out, the catches fixing the plug in the housing

need to be slightly bent aside (Figure 5). When inserting the plug press in

the central part of the head firmly in so that it is blocked in the housing.

It is advisable to make sure that the plug, when pressed, does not slip out

from the opening. During installation of the housing, be careful so as not to

damage the wires which will be passed through the hole in its back panel.

When the housing is secured, you can install the control panel mainboard

and proceed to making the connections.

4.2 C

ONNECTION OF POWER SUPPLY

It is required that the control panel be permanently connected to the mains power. Therefore,

prior to starting the work on the system cabling, make yourself familiar with the electrical

installation of the site and select a circuit which is permanently alive to power the control

panel. The circuit is to be protected with an appropriate fuse.

The control panel is power supplied from the 230 V AC mains. Carelessness or

wrong connection may result in electric shock and pose a threat to life!

Therefore, exercise particular caution when connecting the control panel. In the

process of installation and connection of the control panel, the cable to be used

for mains supply must not be alive!

Description of electrical connections to the CA-6 OBU housing.

The AC power supply unit encased in the plastic box is fully electrically isolated from the

metal housing.

• Connect the 230 V alternating voltage leads to the transformer terminals marked

“AC 230 V”.

• Connect the output voltage wires of the transformer secondary winding to the “AC~18 V”

terminals on the control panel mainboard.

Figure 5.

PRESS IN

BEND ASIDE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-5 Plus Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-5 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info