Bedienungsanleitung Satel CA-5 (Seite 6 von 24) (Englisch)

699607

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

SER

ANUAL

CA-5

Note: Access to all functions of the control panel in version 2.10 is provided by: LCD

keypads in program version 1.08 and later, and CA-5 KLED-S keypads in version1.1

and later.

4.1 LED

UNCTIONS

The LED indicators inform the user about the security system status:

ALARM

(red color) – the LED is on during alarm conditions, and goes out after alarm

reset. Blinking of the LED indicates there was an alarm in the system (alarm memory).

ARMED

(green color ) – the LED is on when the system is armed (the LED can be

optionally extinguished by the control panel 3 minutes after arming). Blinking of the

LED indicates that exit countdown is running.

TROUBLE

(yellow color) – blinking of the LED indicates a trouble in the security system.

The LED will be extinguished after the trouble cause is cleared, or the function of

current trouble checkup is executed (key 7 function)..

POWER

(green color) – the LED indicates the control panel power status:

− ON – mains supply and battery OK,

− blinking – low battery,

− OFF – AC loss.

PROGRAMMING

(red color ) – the LED indicates the control panel is being programmed

from the keypad:

− ON – the control panel is in the service mode; press successively the [0][#]

keys to return to the normal operating mode,

− blinking slowly – indicates entering the user functions menu,

− blinking fast – indicates entering the service / user function, reviewing the

alarm / trouble memory.

1…5 - (red color) LEDs indicating the status of system zones:

− ON – zone violated,

− blinking fast – alarm memory (the zone triggered alarm, but is not violated any

more),

− blinking very fast – memory of the first violation when armed (the zone

triggered alarm, or was violated as first when armed, but is not violated any

more),

− ON with a short extinguishment every 2 seconds – detector tamper (2EOL

zone type),

− flashing every 2 seconds – tamper memory (detector was tampered – 2EOL

zone type),

− blinking slowly – zone bypassed (indicated only with the partition disarmed).

Notes:

− Depending on the options set, the zone alarm memory is active until disarming and alarm

clearing, or until performing alarm log review with the system previously disarmed, or,

alternatively, until rearming the system.

− If, with the control panel armed, an E

NTRY

XIT

or D

ELAYED

zone is violated as the first one,

and then another zone triggers alarm, the memory of the first alarm will be assigned to the

zone which was violated first.

− If, after violation of an E

NTRY

XIT

or D

ELAYED

zone, the system becomes disarmed

without triggering any alarm, the memory of the first alarm (violation) will be

automatically reset.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-5 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info