Bedienungsanleitung Satel CA-5 (Seite 20 von 24) (Englisch)

699607

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

SER

ANUAL

CA-5

6.9 BI

OUTPUTS

[CODE][

][8][#]

The purpose of the function is determined by the installer. It can be used, for example, for

switching on the external lighting or any electrical devices.

The function is active when the BI

SWITCH

type is selected for one of the outputs.

Using the function will permanently change the output status into the opposite one (until the

function is used again). An inactive output will be activated, and an active output will be

deactivated.

Switching the output on is confirmed by the keypad with four short beeps and a long one,

while switching it off – with three short beeps.

6.10 P

OWER

UPPLY

ESET

[CODE][

][9][#]

The function is used for handling special detectors equipped with individual on/off memory,

which is cleared by shutting down power supply (for example, smoke detectors). Calling the

function temporarily disconnects power supply for such detectors.

The function is active when the RESETTABLE

POWER

type is selected for one of the outputs.

6.11 E

VENTS

[

FUNCTION

–

ONLY

LCD

KEYPAD

]

The function is available in LCD keypad and makes it possible to view the whole contents of

the events log (the last 255). To view the events, the user function menu should be opened

with master user code or with service code, and next the “Events” function should be called.

The way of viewing is described in section HOLD DOWN USER FUNCTIONS.

6.12 T

ESTING OUTPUTS AND LED INDICATORS

[CODE][

][11][#]

The function makes it possible to check the current status of the control panel outputs

(active/inactive), as well as functioning of the outputs and devices connected to them. After

calling the function from the LED type keypad, the control panel will indicate the current

status of outputs on LEDs with corresponding numbers: 1 – OUT1, 2 – OUT2, 3 – OUT3. The

lit up LED means active output, the extinguished LED inactive output. In the LCD keypad, the

status of outputs is displayed on the first three characters of the second line of the display.

The active outputs are indicated by displaying a corresponding digit (1, 2, or 3), and the

inactive – by displaying a dot. In order to carry out the functional test of the output

(arm/disarm), press the key with the number of specified output. By repeatedly pressing the

same key the output status will be toggled to the opposite one. Activation/deactivation of an

output is acknowledged by three short beeps.

Additionally, the function makes it possible to check operation of the LEDs in all keypads

connected to the control panel. Press the key [0] when the function is active to light up all the

LEDs (indicators and keypad illumination) which were unlit at the given moment. Press any

key with another digit number to extinguish the LEDs which were turned on for the duration of

the test.

After quitting the function key [#] or [

], the control panel will restore the previous status of the

outputs, from before calling the function.

6.13 S

ERVICE ACCESS

[CODE][

][12][#]

The function, which is available to the master user, allows the installer to access the system

by using the service code. It requires some data – i.e. the time period during which the

service mode of the control panel will be available to the installer (service). After expiry of the

preprogrammed time, the access will be blocked, except when the value 99 is set, which

makes permanent the service mode access by using the code (default setting). In order to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-5 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info