Bedienungsanleitung Satel CA-6 (Seite 30 von 36) (Englisch)

699578

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

28 SATEL Installer Manual

DLOAD10 program

The DLOAD10 program, delivered with the control panel, is designed for programming the

CA-5, CA-6, CA-10 control panels, as well as the RX-2K, RX-4K and RE-4K radio controllers,

the GSM-4 module and the ACU-100 wireless system controller, from the computer.

Additionally, the program makes it possible to create: documentation of alarm systems, sets

of programmed system parameters for various configurations ("patterns" which facilitate the

programming of new systems), event sets for each system. It also enables to remotely

operate the control panel in the same way as with the keypads.

The program is designed for IBM PC/AT compatible computers. It works in any computer

hardware configuration in the WINDOWS (9x/ME/2000) environment. It is recommended that

the program be installed on the computer hard disk.

The control panel communicates with the computer through the RS-232 (TTL) port or via the

telephone line. For telephone communication with the panel, the program uses a modem

controlled by one of the COM ports (internal or external), compatible with the HAYES

"AT Command" standard. Communication with the control panel is possible in the

CCITT V.21 or BELL 103 standards (at 300 Bps). As the control panel transmits data only

with a speed of 300 bauds, the modem must support this speed of operation.

Usually a suitable modem configuration is necessary: 300 bps speed and disabled

function of negotiating the transmission standard.

In order to install the program, run the D10setup.exe program from a CD-ROM delivered

with the control panel. When installation is completed, you can start the program. Access to

the program is protected with an access code. After installation, the code is [1][2][3][4] and

can be changed to any sequence of 16 alphanumeric characters. As long as it is set by

default, you can start the program (with default code [1][2][3][4]) by pressing the „ENTER”

key (no access code need to be entered).

Having started the program, you should choose in the computer a proper configuration and

initialize the work of RS port or modem by means of which the control panel will be

programmed. By default, the program opens the CA-10 window. Than you can select the

CA-6 control panel and start the connection (either remote or local).

A HELP system, which facilitates operating of the DLOAD10 and programming of the control

panel parameters, is provided. The system is accessible from the „HELP” menu, or by

pressing the F1 key on the computer keyboard. To get an instant access to more detailed

information, first select the required element in the program window (by clicking on it with the

left mouse button), and then press the F1 key.

Program configuration for communication with the control panel

In order to begin configuration, click on the icon to open the „Configuration” window.

The „Port RS-232” tab permits selecting the computer port number in the case of direct

programming through the panel RS port. If the control panel is being programmed by

means of the modem, select the „Modem” tab and click on the „Details” button.

The modem communication can be started by clicking on the icon (or selecting the

„Modem” command from the „Communication” menu). The program will open a dialog box

enabling connection to be established and will prompt the further course of action. For

details see the section „Remote programming – DOWNLOADING”.

The type of control panel is recognized automatically on establishing connection, or can be

selected through the „File” menu.

Calling the function of reading the control panel data (icon

) after the communication

has been established may speed up the subsequent process of saving the changes in the

control panel settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel CA-6 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel CA-6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info