699393
12
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
10 INT-TSG SATEL
Show viol. zones [Zone violation] – with this option enabled, violating the CHIME signal
triggering zone result additionally in the zone name being displayed.
Auto-Arm delay countdown [Auto-arm delay] – with this option enabled, the auto-arm delay
countdown in partition is signaled acoustically.
Show disarm messages [Show disarming] – if this option is enabled, the keypad will inform
about disarming with a displayed message at all times. If the option is disabled – only in
case of disarming from the given keypad.
Show arm messages [Show arm] – if this option is enabled, the keypad will inform about
arming with a displayed message (irrespective of how the system was armed).
Quick control [Control (8#)] – if this option is enabled, the O
UTS CONTROL
user function can
be started without entering the user code:
– after tapping the icon on the main screen, if no macro command is assigned to the
group;
after tapping and holding the
icon on the main screen for about 3 seconds, if at
least one macro command is assigned to the group;
from the terminal, after you tap in turn the
and keys.
Zones
For each of the keypad zones can be defined whether it will be used or not.
Auto-backlight
The keypad can be woken up after occurrence of a specified event in the system: starting the
entry delay countdown in a selected partition, or violating a selected zone.
Wake-up
You can define how the keypad will respond to the wake-up (after a tap on the screen by the
user or occurrence of a specified event in the system):
Status screen – status screen will be displayed.
Menu screen – main screen will be displayed.
Disarming – if at least one partition managed by the keypad is armed, the authorization
screen will be displayed (after entering the code and tapping , and depending on the
system state: the partition(s) will be disarmed / partition selection screen will be displayed /
“Alarm clearing / Disarming” screen will be displayed). If none of the partitions is armed,
the main screen will be displayed.
Photo frame – if this option is enabled, the following will be displayed after 10 minutes of
keypad inactivity:
slide show – if there are at least two pictures on the memory card and the value of
C
HANGE PICTURE EVERY
parameter is different from 0,
clock – if there are one or no pictures on the memory card or the value of C
HANGE PICTURE
EVERY
parameter is 0.
If this option is disabled, the screen will go blank after 10 minutes of keypad inactivity.
Tamper signaled in part. [Tamper in part.] – partition where alarm will be triggered in the
event of keypad tamper (opening the enclosure or disconnecting keypad from the bus).
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Satel INT-TSG-BSB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Satel INT-TSG-BSB

Satel INT-TSG-BSB Kurzanleitung - Deutsch - 2 seiten

Satel INT-TSG-BSB Bedienungsanleitung - Deutsch - 19 seiten

Satel INT-TSG-BSB Installationsanweisung - Deutsch - 29 seiten

Satel INT-TSG-BSB Kurzanleitung - Englisch - 2 seiten

Satel INT-TSG-BSB Bedienungsanleitung - Englisch - 20 seiten

Satel INT-TSG-BSB Bedienungsanleitung - Englisch - 18 seiten

Satel INT-TSG-BSB Kurzanleitung - Holländisch - 2 seiten

Satel INT-TSG-BSB Bedienungsanleitung - Holländisch - 18 seiten

Satel INT-TSG-BSB Bedienungsanleitung - Holländisch - 20 seiten

Satel INT-TSG-BSB Installationsanweisung - Holländisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info