Bedienungsanleitung Satel INT-TSG-BSB (Seite 17 von 28) (Englisch)

699393

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

SATEL INT-TSG 15

Authorization required – if this option is enabled, the macro command will only be run after

user authorization by using a code. The code entered in the “Code” field will be ignored.

Disabled if armed – if this option is enabled, the macro command will not be available, when

any of the partitions operated by the keypad is armed.

Autoexecute – if this option is enabled and the group contains just one macro command, the

macro command will run immediately on tapping the icon of macro command group (or the

status screen corner, if the M

ACROS AVAILABLE ON THE STATUS SCREEN

option is enabled). If

the A

UTHORIZATION REQUIRED

option is enabled, authorization with code will be necessary.

No confirmation messages – if this option is enabled, no messages will appear to inform

you about execution of a command or an error after running a macro command (the

screen from which the macro command was run will still be displayed).

Icon – the macro command icon. The list of available icons will be displayed after you click

the button. If the S

TATE FOLLOW OUTPUT

option is enabled, select 2 icons for the macro

commands. One icon will be displayed when the output is inactive, and the other – when

the output is active.

State follow output – if this option is enabled, the icon of macro command will change

depending on the status of output whose number should be selected in the field on the

right side. Select an output, the status of which depends on the actions taken by the

control panel after running the macro command. Thus it will be possible to inform the

user by means of macro command icons about, for example, the status of outputs

controlled by using macro commands or the status of partitions which are armed by

a macro command.

Show name – if this option is enabled, the macro command name will be displayed on the

keypad below the icon.

Commands list – commands assigned to the currently highlighted macro command. The

and buttons allow you to change the order of commands (moving the selected

command up and down).

Add – click to add to the list a new command, selected in the “Command” field.

Change – click to save the changes to the command parameters which were made after

adding the command to the list (otherwise, the changes made will not be saved).

Delete – click to remove the highlighted command from the list.

Command – the control panel executed function which can be assigned to the macro

command. The list of all available functions will be displayed after you click the

button.

Depending on which function you choose:

Arming – select the partitions which are to be armed (double-click on the field designated

by the partition number) and define the arming mode (next clicks on the field designated

by the partition number; the digit inside the field has the following meaning: 0 - fully

armed; 1 – fully armed+bypasses; 2 – armed without interior; 3 - armed without interior

and without entry delay).

Disarming – select the partitions which are to be disarmed (double-click on the field

designated by the partition number).

Alarm clearing – select the partitions in which alarm is to be cleared (double-click on the

field designated by the partition number).

Bypass zones – select the zones which are to be inhibited (double-click on the field

designated by the zone number).

Unbypass zones – select the zones which are to be unbypassed (double-click on the field

designated by the zone number).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Satel INT-TSG-BSB Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Satel INT-TSG-BSB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info